numbers not showing in search lead

Any and all non-support discussions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

numbers not showing in search lead

Postby RukuBaruku » Wed Sep 03, 2014 10:01 am

hello,
i have installed ViciBox Redux v.5.0.2-130821in HP ProLiant DL580 G5 E7310 1.6GHz Quad Core and when i try to search for e lead it does not show the number called or other info. Only XXXXXXX. chech Image
Vicibox 5.03 from .iso | VERSION: 2.10-450a BUILD: 140822-1034 | 1.8.23.0-vici | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | HP ProLiant DL580 G5 E7310 1.6GHz Quad Core
RukuBaruku
 
Posts: 23
Joined: Mon Mar 17, 2014 4:47 am

Re: numbers not showing in search lead

Postby williamconley » Wed Sep 03, 2014 10:14 am

1) Welcome to the Party! 8-)

2) As you are obviously new here, I have some suggestions to help us all help you:

When you post, please post your entire configuration including (but not limited to) your installation method and vicidial version with build.

This IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)

You should also post: Asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box. If your installation method is "from scratch" you must post your operating system and should also post the .iso version from which you installed your original operating system. If your installation is "Hosted" list the site name of the host.

If this is a "Cloud" or "Virtual" server, please note the technology involved along with the version of that techology (ie: VMware Server Version 2.0.2). If it is not, merely stating the Motherboard model # and CPU would be helpful.

Similar to This:

Vicibox X.X from .iso | Vicidial X.X.X-XXX Build XXXXXX-XXXX | Asterisk X.X.X | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel DG35EC | Core2Quad Q6600

3) User settings have been set to "all 1s". For most admin settings this is good ... but some of those settings you turned on said 'block...'. So you apparently specifically blocked your own access to view this data. Go back and read the settings one at a time and see which ones should be 0 instead of 1 (they are kinda grouped so all those that should be 0 are together).
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: numbers not showing in search lead

Postby RukuBaruku » Fri Sep 05, 2014 1:38 am

thanks! Done!!!!
Vicibox 5.03 from .iso | VERSION: 2.10-450a BUILD: 140822-1034 | 1.8.23.0-vici | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | HP ProLiant DL580 G5 E7310 1.6GHz Quad Core
RukuBaruku
 
Posts: 23
Joined: Mon Mar 17, 2014 4:47 am


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 45 guests