rejecting call

Any and all non-support discussions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

rejecting call

Postby hhaq » Tue Oct 21, 2014 4:50 am

I have install vicidial 5 and used the below configuration from a asterisk PBX and sip get register and receiving call. when i am using same configuration for the voip provider vicidial is not receiving the call but voip account is register successful.

I have checked from the voip provider that my (vicidial) system is sending 401 sip error to them. Can any one help me on this. We are not showing any log on the asterisk -r.

Moreover my voip account run perfectly with the ViciBox 4.x86_64 which is on asterisk 1.4 version.

register => 2000:cc2000@103.4.X.X:5060/2000

[2000]
username=2000
secret=cc2000
allow=alaw
allow=ulaw
type=friend
host=103.4.X.X
dtmfmode=rfc2833
insecure=very
context=trunkinbound


ViciBox5.x86_64-5.0.3 | Admin Version VERSION: 2.10-451a Build: BUILD: 140902-0816 | Asterisk 1.8.31.0-vici built by abuild @ cloud114 on a x86_64 |


Regards
H.Haq
hhaq
 
Posts: 12
Joined: Mon Jan 14, 2013 10:20 am

Re: rejecting call

Postby DomeDan » Tue Oct 28, 2014 6:04 am

dont think "/2000" should be there:
register => 2000:cc2000@103.4.X.X:5060/2000

and set
insecure=invite
instead of "very"
Vicidial Partner. Region: Sweden/Norway.
Does Vicidial installation, configuration, customization, add-ons, CRM implementation, support, upgrading, network-related, pentesting etc. Remote and onsite assistance.
Email: domedan (at) gmail.com
DomeDan
 
Posts: 1226
Joined: Tue Jan 04, 2011 9:17 am
Location: Sweden

Re: rejecting call

Postby geoff3dmg » Tue Oct 28, 2014 7:19 am

The '/2000' means you're registering on a specific extension at the carrier. If the trunk has multiple DIDs attached to it, you don't want to do this.
Vicibox 5.03 from .iso | VERSION: 2.10-451a BUILD: 140902-0816 | Asterisk 1.8.28.2-vici | Multi-Server | Amfeltec H/W Timing Cards | No Extra Software After Installation | Dell PowerEdge 1850 | Pentium 4 'Prescott' Xenon Quad @ 3.40GHz
geoff3dmg
 
Posts: 403
Joined: Tue Jan 29, 2013 4:35 am
Location: Lancashire, UK


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 56 guests