Vicidial Cluster with one connection

Any and all non-support discussions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Vicidial Cluster with one connection

Postby Biagio.Viola » Mon Jun 27, 2016 8:20 am

Hi, i write because i have one question.

if i have three PBX-Asterisk/WEB SERVER for Vicidial but i have only one connection with firewall PFsense how i must configure Firewall for RTP traffic?

i find more configuration but i see only one PBX and one firewall, if i must configure NAT with three server for RTP what is a best configuration?

i have only Static IP pubblic with firewall.

if you want configure vicidial cluster with three server pbx and one connection to SIP provider what would use configuration?


sorry for my english, thanks for your cooperation.

regards
ViciBox Redux v.6.0.4 | Asterisk 1.8.32.3-vici | Vicidial VERSION: 2.12-538a BUILD: 160122-1401 © 2016 ViciDial Group| Poweredge 1950 CPU 2 x Xeon 3.6 Ghz RAM 12GB HDD 450 RAID1
Biagio.Viola
 
Posts: 5
Joined: Thu Feb 25, 2016 12:48 pm

Re: Vicidial Cluster with one connection

Postby muyousif » Wed Jun 29, 2016 8:09 am

You can use different rtp ports for each server, you can change rtp ports in /etc/asterisk/rtp.conf like..
for first server:
rtpstart = 10000
rtpend = 12999
for second server:
rtpstart = 13000
rtpend = 15999
and so on.... restart asterisk after this change or just reboot the server.
After this you can do port forwarding in pfsense using these ports.
ViciBox v.6.0.3 | VERSION: 2.14-685a BUILD: 180825-2100| Asterisk 1.8.29 | Cluster: 1 DB: 16Core@2.67GHz 16RAM | 1 WEB: 8Core@2.50GHz 16RAM | 8 Tel: QuadCore@2.93GHz 8RAM
muyousif
 
Posts: 119
Joined: Wed May 14, 2014 5:29 am


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 47 guests