setup recommendation for 350 agents

Any and all non-support discussions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

setup recommendation for 350 agents

Postby Invictus » Wed Dec 28, 2016 10:16 am

We use;
Vicidial VERSION: 2.9-441a, BUILD: 140612-1628
asterisk 1.8.23.0

and we have a hp storage server;
2 x XEON X5690
148GB memory
2TB HDD

is our server enough for 350 agents? should we install full server (asterisk/web/database) or create vps's on server and use in cluster mode?
Invictus
 
Posts: 16
Joined: Wed Dec 28, 2016 9:49 am

Re: setup recommendation for 350 agents

Postby mflorell » Wed Dec 28, 2016 8:15 pm

No, one server is not enough for 350 agents.

To tell you how many you will need, and their hardware specs, you have to provide us with more information:
- how many SIP trunks
- what codecs will you use
- what % outbound and inbound
- will you be autodialing, and if so, what line-to-agent ratio
mflorell
Site Admin
 
Posts: 18338
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: setup recommendation for 350 agents

Postby Invictus » Fri Dec 30, 2016 3:43 am

mflorell wrote:No, one server is not enough for 350 agents.

To tell you how many you will need, and their hardware specs, you have to provide us with more information:
- how many SIP trunks
- what codecs will you use
- what % outbound and inbound
- will you be autodialing, and if so, what line-to-agent ratio

- min 3, max 5 SIP trunks
- codecs we will use: ulaw, alaw, g729
- 90% outbound, 10% inbound
- we will use autodial with max ratio 5
Invictus
 
Posts: 16
Joined: Wed Dec 28, 2016 9:49 am

Re: setup recommendation for 350 agents

Postby mflorell » Fri Dec 30, 2016 8:13 am

Here would be our MINIMUM recommendations for a system with those requirements:
- 14 x dialers(single quad-core CPUs with 8GB RAM)
- 2 x webservers(single quad-core CPUs with 8GB RAM)
- 1 x DB server(quad-quad-core CPUs with 32 GB RAM and LSILogic MegaRAID card with 4 x fast SSD drives set up in two RAID-1 partitions, one for DB data and one for everything else)
- also recommended are another DB server to operate as a slave/reporting/backup DB, as well as an archive server to store recordings

We have set up many VICIdial systems of this size, and not using a configuration like the above WILL lead to problems with your system.
mflorell
Site Admin
 
Posts: 18338
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 39 guests