Sangoma UT50

Any and all non-support discussions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Sangoma UT50

Postby prosenjit2009 » Wed Nov 21, 2018 12:47 pm

HP ProLiant DL160 G5

Server type- ProLiant DL160 G5
32 GB RAM
8 Core CPU
CPU TYPE-XEON 3.0
VERSION: 2.14b0.5
BUILD: 180411-1647
SVN version :2964
DB Schema Version:1541
ASTERISK VERSION-11.25.3
INSTALLER VERSION-8.0.1
No PRI/SANGOMA
No Extra Software or hardware.

Hello,

I am planning to purchase a Sangoma UT50 for my vicibox which is already running. But I am not much aware about how it works. I have some idea that it replace inbuilt dahdi in vicibox and work as replacement of dahdi and provide better voice quality with accurate timing. Unfortunate I could not got much wiki about installation , what ever i got those really old and no use for now. Can anyone elaborate me how this songoma UT50 works and and installation procedures in vicibox 8.0.1. Agents use hard phone to outbound calling.
prosenjit2009
 
Posts: 38
Joined: Fri Dec 22, 2017 6:12 am

Re: Sangoma UT50

Postby mflorell » Fri Nov 23, 2018 3:11 am

We stopped using and supporting the USB timers because they are not 100% reliable. We had over 100 installed in our hosted setup years ago and due to issues with USB we would have some timers "disappear" every week, and it would require a full power cycle(not a reboot) to have them recognized by the system again.

We switched to the Amfeltec PCIexpress timers and they have been working great for years now. We have installed hundreds of them so far.
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Sangoma UT50

Postby prosenjit2009 » Fri Nov 23, 2018 8:59 am

thanks for your valuable reply.
prosenjit2009
 
Posts: 38
Joined: Fri Dec 22, 2017 6:12 am

Re: Sangoma UT50

Postby williamconley » Sun Nov 25, 2018 1:26 am

mflorell wrote:We stopped using and supporting the USB timers because they are not 100% reliable. We had over 100 installed in our hosted setup years ago and due to issues with USB we would have some timers "disappear" every week, and it would require a full power cycle(not a reboot) to have them recognized by the system again.

We switched to the Amfeltec PCIexpress timers and they have been working great for years now. We have installed hundreds of them so far.

Shouldn't you be reselling these?
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Sangoma UT50

Postby mflorell » Mon Nov 26, 2018 4:07 pm

We do resell the Amfeltec PCIexpress x1 timer cards, you just need to email sales@vicidial.com if you would like to buy one from us.
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Sangoma UT50

Postby williamconley » Mon Nov 26, 2018 4:59 pm

mflorell wrote:We do resell the Amfeltec PCIexpress x1 timer cards, you just need to email sales@vicidial.com if you would like to buy one from us.

So ... they aren't on your catalog? That seems oddly unIntuitive.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Sangoma UT50

Postby mflorell » Mon Nov 26, 2018 8:04 pm

We haven't updated the page in a while, but we do mention them,
http://wp.vicidial.com/?page_id=179
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Sangoma UT50

Postby dspaan » Fri Dec 14, 2018 5:45 pm

When is this timing hardware needed? What kind of loads are we talking about?
Regards, Dennis

Vicibox 9.0.1
Version: 2.14b0.5
SVN Version: 3199
DB Schema Version: 1588
Build: 200310-1801
dspaan
 
Posts: 1374
Joined: Fri Aug 21, 2009 1:40 pm
Location: The Netherlands

Re: Sangoma UT50

Postby mflorell » Sun Dec 16, 2018 8:48 am

There is no hard threshold for these, but what we have experienced is that at higher loads there are less audio issues or recording issues when there is a properly configured hardware time installed in the dialer.
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Sangoma UT50

Postby dspaan » Sun Dec 16, 2018 6:53 pm

What kind of audio and recording issues are we talking about? Recordings not being made at all? Or quality problems?
Regards, Dennis

Vicibox 9.0.1
Version: 2.14b0.5
SVN Version: 3199
DB Schema Version: 1588
Build: 200310-1801
dspaan
 
Posts: 1374
Joined: Fri Aug 21, 2009 1:40 pm
Location: The Netherlands

Re: Sangoma UT50

Postby mflorell » Mon Dec 17, 2018 6:07 am

quality problems, like missing segments, skipping audio in the recording.
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Sangoma UT50

Postby williamconley » Fri Dec 21, 2018 4:37 pm

It provides stability at higher loads by offloading specific functions to the card. But it does not provide any features. It can allow higher workloads with the same server hardware before problems arise.

Benefit: More work from the same server hardware

Challenges: It's not free, obviously. If your server dies and you build a new one to replace it, you have to bring this hardware along for the ride for a full duplicate of the old system. Configuration may be required. Another component to troubleshoot (although apparently that's not much of an issue with the Amfeltec version).
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 69 guests