Configuring TE235 dual span

Any and all non-support discussions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Configuring TE235 dual span

Postby worseo » Mon Nov 15, 2021 11:23 am

Hello all here, thank you all for your initial support and I a getting to understand vicidial and asterisk more and more. I still need your help.

I have install vicibox 10
Closter on three serversas below
Server0-DB/WEB
Server1-Dialer1 with TE135F digium single span card
Server2-Dialer2 with Te235 digium dual span card

On the Dialer1 all is well and I can make test inbound and outbound calls.

On dialer2, the card is always in T1 mode when I run dahdi_scan

Please see below my configs and show commands.

dialer02:~ # dahdi_scan
[1]
active=yes
alarms=UNCONFIGURED
description=WCTE23X (PCI) Card 0 Span 1
name=WCTE2/0/1
manufacturer=Digium
devicetype=Wildcard TE235
location=PCI Bus 179 Slot 01
basechan=1
totchans=24
irq=0
type=digital-T1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI
framing_opts=ESF,D4
coding=
framing=CAS
[2]
active=yes
alarms=UNCONFIGURED
description=WCTE23X (PCI) Card 0 Span 2
name=WCTE2/0/2
manufacturer=Digium
devicetype=Wildcard TE235
location=PCI Bus 179 Slot 01
basechan=25
totchans=24
irq=0
type=digital-T1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI
framing_opts=ESF,D4
coding=
framing=CAS


dialer02:~ # dahdi_cfg -vvv
DAHDI Tools Version - 3.1.0

DAHDI Version: 3.1.0
Echo Canceller(s):
Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04)
Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
Channel 06: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 06)
Channel 07: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 07)
Channel 08: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 08)
Channel 09: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 09)
Channel 10: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 10)
Channel 11: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 11)
Channel 12: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 12)
Channel 13: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 13)
Channel 14: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 14)
Channel 15: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 15)
Channel 16: D-channel (Default) (Echo Canceler: none) (Slaves: 16)
Channel 17: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 17)
Channel 18: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 18)
Channel 19: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 19)
Channel 20: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 20)
Channel 21: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 21)
Channel 22: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 22)
Channel 23: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 23)
Channel 24: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 24)
Channel 25: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 25)
Channel 26: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 26)
Channel 27: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 27)
Channel 28: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 28)
Channel 29: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 29)
Channel 30: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 30)
Channel 31: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 31)
Channel 32: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 32)
Channel 33: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 33)
Channel 34: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 34)
Channel 35: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 35)
Channel 36: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 36)
Channel 37: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 37)
Channel 38: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 38)
Channel 39: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 39)
Channel 40: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 40)
Channel 41: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 41)
Channel 42: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 42)
Channel 43: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 43)
Channel 44: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 44)
Channel 45: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 45)
Channel 46: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 46)
Channel 47: D-channel (Default) (Echo Canceler: none) (Slaves: 47)
Channel 48: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 48)
Channel 49: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 49)
Channel 50: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 50)
Channel 51: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 51)
Channel 52: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 52)
Channel 53: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 53)
Channel 54: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 54)
Channel 55: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 55)
Channel 56: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 56)
Channel 57: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 57)
Channel 58: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 58)
Channel 59: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 59)
Channel 60: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 60)
Channel 61: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 61)
Channel 62: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 62)

62 channels to configure.

DAHDI_SPANCONFIG failed on span 1: Invalid argument (22)


Configuration files

/etc/dahdi/system.conf

# Span 1: WCTE2/0/1 "WCTE23X (PCI) Card 0 Span 1" (MASTER) ESF/B8ZS RED
span=1,1,0,ccs,hdb3
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31

# Span 2: WCTE2/0/2 "WCTE23X (PCI) Card 0 Span 2" ESF/B8ZS RED
span=2,2,0,ccs,hdb3
# termtype: te
bchan=32-46,48-62
dchan=47
echocanceller=mg2,32-46,48-62

# Global data

loadzone = uk
defaultzone = uk

/etc/modprobe.d/dahdi-blacklist.conf

blacklist wct4xxp
blacklist wcte12xp
blacklist wcte13xp
blacklist wct1xxp
blacklist wcte11xp
blacklist wctdm24xxp
blacklist wcfxo
blacklist wctdm
blacklist wctc4xxp
blacklist wcb4xxp
blacklist wcaxx
#blacklist wcte43x

# Some mISDN drivers may try to attach to cards supported by DAHDI. If you
# have a card which is *not* supported by DAHDI but supported by one of the
# below drivers you should feel free to remove it from the blacklist below.
blacklist hfcmulti
blacklist netjet
blacklist hfcpci


/etc/asterisk/dahdi-channels.conf

; Span 1: WCTE2/0/1 "WCTE23X (PCI) Card 0 Span 1" (MASTER) ESF/B8ZS RED
group=0,11
context=incoming
switchtype = national
signalling = pri_cpe
channel => 1-31
context = trunkinbound
group = 63

; Span 2: WCTE2/0/2 "WCTE23X (PCI) Card 0 Span 2" ESF/B8ZS RED
group=0,12
context=incoming
switchtype = national
signalling = pri_cpe
channel => 32-62
context = trunkinbound
group = 63


Please help me I am lost though I manage to get the single span up.
Last edited by worseo on Mon Nov 15, 2021 12:25 pm, edited 1 time in total.
Vicibox 10
Version: 2.14b0.5
SVN Version: 3533
DB Schema Version: 1646
Cluster of 3 Servers
2 Dialer, 1Web/DB
worseo
 
Posts: 38
Joined: Sat Jul 10, 2021 6:46 am

Re: Configuring TE235 dual span

Postby worseo » Mon Nov 15, 2021 11:25 am

Sorry I omitted this one

/etc/modprobe.d/dahdi.conf
options wcte43x default_linemode=e1
Vicibox 10
Version: 2.14b0.5
SVN Version: 3533
DB Schema Version: 1646
Cluster of 3 Servers
2 Dialer, 1Web/DB
worseo
 
Posts: 38
Joined: Sat Jul 10, 2021 6:46 am

Re: Configuring TE235 dual span

Postby striker » Tue Nov 16, 2021 1:23 am

can you type dahdi_genconf -v
and post back the output..
https://www.striker24x7.com https://www.youtube.com/c/striker24x7 skype id : striker24x7
striker
 
Posts: 939
Joined: Sun Jun 06, 2010 10:25 am

Re: Configuring TE235 dual span

Postby worseo » Tue Nov 16, 2021 4:33 am

striker wrote:can you type dahdi_genconf -v
and post back the output..


this is the output

dialer02:~ # dahdi_genconf -v
Default parameters from /etc/dahdi/genconf_parameters
Generating /etc/dahdi/assigned-spans.conf
cut: '/sys/bus/dahdi_devices/devices/pci:0000:b3:00.0/spantype': No such file or directory
Generating /etc/dahdi/system.conf
Generating /etc/asterisk/dahdi-channels.conf
Vicibox 10
Version: 2.14b0.5
SVN Version: 3533
DB Schema Version: 1646
Cluster of 3 Servers
2 Dialer, 1Web/DB
worseo
 
Posts: 38
Joined: Sat Jul 10, 2021 6:46 am

Re: Configuring TE235 dual span

Postby striker » Tue Nov 16, 2021 4:57 am

can you remove dahdi and reinstall dahdi
and then run dahdi_genconf -v
https://www.striker24x7.com https://www.youtube.com/c/striker24x7 skype id : striker24x7
striker
 
Posts: 939
Joined: Sun Jun 06, 2010 10:25 am

Re: Configuring TE235 dual span

Postby worseo » Tue Nov 16, 2021 5:42 am

striker wrote:can you remove dahdi and reinstall dahdi
and then run dahdi_genconf -v



Which version of dahdi should I install using vicibox 10
Vicibox 10
Version: 2.14b0.5
SVN Version: 3533
DB Schema Version: 1646
Cluster of 3 Servers
2 Dialer, 1Web/DB
worseo
 
Posts: 38
Joined: Sat Jul 10, 2021 6:46 am

Re: Configuring TE235 dual span

Postby worseo » Tue Nov 16, 2021 5:51 am

worseo wrote:
striker wrote:can you remove dahdi and reinstall dahdi
and then run dahdi_genconf -v



Which version of dahdi should I install using vicibox 10

I am using opensuse
Vicibox 10
Version: 2.14b0.5
SVN Version: 3533
DB Schema Version: 1646
Cluster of 3 Servers
2 Dialer, 1Web/DB
worseo
 
Posts: 38
Joined: Sat Jul 10, 2021 6:46 am

Re: Configuring TE235 dual span

Postby worseo » Tue Nov 16, 2021 7:04 am

worseo wrote:
worseo wrote:
striker wrote:can you remove dahdi and reinstall dahdi
and then run dahdi_genconf -v



Which version of dahdi should I install using vicibox 10

I am using opensuse



I did remove and reinstall same version but still get the same error. (Version - 3.1.0
)
Vicibox 10
Version: 2.14b0.5
SVN Version: 3533
DB Schema Version: 1646
Cluster of 3 Servers
2 Dialer, 1Web/DB
worseo
 
Posts: 38
Joined: Sat Jul 10, 2021 6:46 am

Re: Configuring TE235 dual span

Postby worseo » Tue Nov 16, 2021 7:16 am

Is anyone available to help me with this for a fee? This seems to be hard for me and I am out of time.
Vicibox 10
Version: 2.14b0.5
SVN Version: 3533
DB Schema Version: 1646
Cluster of 3 Servers
2 Dialer, 1Web/DB
worseo
 
Posts: 38
Joined: Sat Jul 10, 2021 6:46 am

Re: Configuring TE235 dual span

Postby Benjiex » Fri Apr 08, 2022 3:50 am

Is it possible to uninstall and reinstall Dahdi? Afterwards, run dahdi genconf -v

----------------------------------------------
Minecraft coding for kids are not just simply games. Instead, games transform into gateways for kids to explore and do more than just "play," like wanting to jump into the world of computer science by learning to code.
Benjiex
 
Posts: 3
Joined: Thu Apr 19, 2018 11:51 pm


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 28 guests