Calls from outbound campaign rejected

Any and all non-support discussions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Calls from outbound campaign rejected

Postby worseo » Tue Nov 23, 2021 2:17 pm

Hello team,
I am still struggling to get my outbound campaign to call out.I was about to get inbound blended to work but outbound is not working. Please see my dial plan in /etc/asterisk/extension.conf below. So I need to add any line for the outbound campaign?

exten => _9X.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9X.,n,Dial(DAHDI/g0/${EXTEN:1},,tTo)
exten => _9X.,n,Hangup()
Vicibox 10
Version: 2.14b0.5
SVN Version: 3533
DB Schema Version: 1646
Cluster of 3 Servers
2 Dialer, 1Web/DB
worseo
 
Posts: 38
Joined: Sat Jul 10, 2021 6:46 am

Re: Calls from outbound campaign rejected

Postby carpenox » Fri Nov 26, 2021 8:03 pm

are you using PRI?
Alma Linux 8.5 | Version: 2.14-858a | BUILD: 220513-0819 | SVN Version: 3602 | DB Schema Version: 1661 | Asterisk 16.17.0-vici
www.CyburDial.net -:- 725-22-CYBUR -:- My Blog: http://vicidial.blog -:- Whatsapp: +19549477572 -:- Skype: live:carpenox_3
carpenox
 
Posts: 1848
Joined: Wed Apr 08, 2020 2:02 am
Location: Coral Springs, FL

Re: Calls from outbound campaign rejected

Postby worseo » Mon Nov 29, 2021 6:46 am

carpenox wrote:are you using PRI?


Yes, I am using pri, digium TE235 card two E1 lines from Telco all on a single DID number.
Vicibox 10
Version: 2.14b0.5
SVN Version: 3533
DB Schema Version: 1646
Cluster of 3 Servers
2 Dialer, 1Web/DB
worseo
 
Posts: 38
Joined: Sat Jul 10, 2021 6:46 am

Re: Calls from outbound campaign rejected

Postby ambiorixg12 » Tue Nov 30, 2021 9:37 pm

With no Asterisk console logs, impossible to help you
Asterisk and FreePBX expert / Twilio & PHP / Python MYSQL developer.

Personal site : http://asterisk-voip.com/
ambiorixg12
 
Posts: 431
Joined: Tue Sep 17, 2013 10:35 pm

Re: Calls from outbound campaign rejected

Postby worseo » Wed Dec 01, 2021 5:15 am

Below is the log while calling 0886004178
Last edited by worseo on Wed Dec 01, 2021 6:05 am, edited 1 time in total.
Vicibox 10
Version: 2.14b0.5
SVN Version: 3533
DB Schema Version: 1646
Cluster of 3 Servers
2 Dialer, 1Web/DB
worseo
 
Posts: 38
Joined: Sat Jul 10, 2021 6:46 am

Re: Calls from outbound campaign rejected

Postby worseo » Wed Dec 01, 2021 5:15 am

Below is the log while calling 0886004178

Started music on hold, class 'default', on channel 'DAHDI/i2/888686786-19d'
[Dec 1 10:17:48] == Manager 'sendcron' logged on from 127.0.0.1
[Dec 1 10:17:48] -- Called 8600053@default
[Dec 1 10:17:48] -- Executing [8600053@default:1] MeetMe("Local/8600053@default-00000123;2", "8600053,F") in new stack
[Dec 1 10:17:48] -- Local/8600053@default-00000123;1 answered
[Dec 1 10:17:48] -- Executing [910886004178@default:1] AGI("Local/8600053@default-00000123;1", "agi://127.0.0.1:4577/call_log") in new stack
[Dec 1 10:17:48] -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=4002))
[Dec 1 10:17:48] -- <Local/8600053@default-00000123;1>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Dec 1 10:17:48] -- Executing [910886004178@default:2] Dial("Local/8600053@default-00000123;1", "DAHDI/g0/10886004178,,tTo") in new stack
[Dec 1 10:17:48] -- Requested transfer capability: 0x00 - SPEECH
[Dec 1 10:17:48] -- Called DAHDI/g0/10886004178
[Dec 1 10:17:48] == Manager 'sendcron' logged on from 127.0.0.1
[Dec 1 10:17:48] -- Called 58600053@default
[Dec 1 10:17:48] -- Executing [58600053@default:1] MeetMe("Local/58600053@default-00000124;2", "8600053,Fmq") in new stack
[Dec 1 10:17:48] -- Local/58600053@default-00000124;1 answered
[Dec 1 10:17:48] -- Executing [8309@default:1] Answer("Local/58600053@default-00000124;1", "") in new stack
[Dec 1 10:17:48] -- Executing [8309@default:2] Monitor("Local/58600053@default-00000124;1", "wav,20211201-101748_0886004178") in new stack
[Dec 1 10:17:48] -- Executing [8309@default:3] Wait("Local/58600053@default-00000124;1", "3600") in new stack
[Dec 1 10:17:48] -- Span 1: Channel 0/1 got hangup request, cause 31
[Dec 1 10:17:48] -- Hungup 'DAHDI/i1/10886004178-1d'
[Dec 1 10:17:48] == Everyone is busy/congested at this time (1:0/0/1)
[Dec 1 10:17:48] -- Executing [910886004178@default:3] Hangup("Local/8600053@default-00000123;1", "") in new stack
[Dec 1 10:17:48] == Spawn extension (default, 910886004178, 3) exited non-zero on 'Local/8600053@default-00000123;1'
[Dec 1 10:17:48] -- Executing [h@default:1] AGI("Local/8600053@default-00000123;1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----31-----CHANUNAVAIL---------------PRI PRI_EVENT_HANGUP_REQ (31))") in new stack
[Dec 1 10:17:48] -- <Local/8600053@default-00000123;1>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... -------PRI PRI_EVENT_HANGUP_REQ (31)) completed, returning 0
[Dec 1 10:17:48] == Spawn extension (default, 8600053, 1) exited non-zero on 'Local/8600053@default-00000123;2'
[Dec 1 10:17:48] WARNING[20919][C-000003e1]: func_hangupcause.c:140 hangupcause_read: Unable to find information for channel
[Dec 1 10:17:48] -- Executing [h@default:1] AGI("Local/8600053@default-00000123;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----31--------------------)") in new stack
[Dec 1 10:17:48] -- <Local/8600053@default-00000123;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ----------) completed, returning 0
Vicibox 10
Version: 2.14b0.5
SVN Version: 3533
DB Schema Version: 1646
Cluster of 3 Servers
2 Dialer, 1Web/DB
worseo
 
Posts: 38
Joined: Sat Jul 10, 2021 6:46 am

Re: Calls from outbound campaign rejected

Postby carpenox » Wed Dec 01, 2021 7:56 am

Is your pri card in ready status?
Alma Linux 8.5 | Version: 2.14-858a | BUILD: 220513-0819 | SVN Version: 3602 | DB Schema Version: 1661 | Asterisk 16.17.0-vici
www.CyburDial.net -:- 725-22-CYBUR -:- My Blog: http://vicidial.blog -:- Whatsapp: +19549477572 -:- Skype: live:carpenox_3
carpenox
 
Posts: 1848
Joined: Wed Apr 08, 2020 2:02 am
Location: Coral Springs, FL

Re: Calls from outbound campaign rejected

Postby ambiorixg12 » Wed Dec 01, 2021 10:52 pm

Have you verified with your carrier, the hangup cause doesn't show any error

Cause No. 31 - normal. unspecified.
This cause is used to report a normal event only when no other cause in the normal class applies.
Asterisk and FreePBX expert / Twilio & PHP / Python MYSQL developer.

Personal site : http://asterisk-voip.com/
ambiorixg12
 
Posts: 431
Joined: Tue Sep 17, 2013 10:35 pm

Re: Calls from outbound campaign rejected

Postby striker » Thu Dec 02, 2021 12:32 am

Called DAHDI/g0/10886004178

are you dialing right no?

is that your local numbers start with " 1 "
or you want to dial 0886004178?

if Prefix/phone code 1 is not required , then in campaign set OMIT Phone Code to Y and dial
post back the output here.
https://www.striker24x7.com https://www.youtube.com/c/striker24x7 skype id : striker24x7
striker
 
Posts: 939
Joined: Sun Jun 06, 2010 10:25 am

Re: Calls from outbound campaign rejected

Postby worseo » Mon Dec 06, 2021 7:04 am

Thanks to you all for the support.

I change the dial method from manual to inbound_man and I am able to dial out manually but not with dial next number for which I will look at the lead list. However, other agents are not able to make calls at all even though they can call from the inbound campaign. Below is the log.

[Dec 6 11:39:35] Connected to Asterisk 13.38.2-vici currently running on dialer01 (pid = 14819)
[Dec 6 11:39:40] > 0x7f9614017a80 -- Strict RTP learning after remote address set to: 10.10.191.30:4020
[Dec 6 11:39:40] -- SIP/120-0000000e answered
[Dec 6 11:39:40] -- Executing [8600054@default:1] MeetMe("SIP/120-0000000e", "8600054,F") in new stack
[Dec 6 11:39:40] -- Created MeetMe conference 1020 for conference '8600054'
[Dec 6 11:39:40] -- <SIP/120-0000000e> Playing 'conf-onlyperson.gsm' (language 'en')
[Dec 6 11:39:40] > 0x7f9614017a80 -- Strict RTP switching to RTP target address 10.10.191.30:4020 as source
[Dec 6 11:39:41] == Manager 'sendcron' logged off from 127.0.0.1
[Dec 6 11:39:45] > 0x7f9614017a80 -- Strict RTP learning complete - Locking on source address 10.10.191.30:4020
[Dec 6 11:40:01] == Manager 'sendcron' logged on from 127.0.0.1
[Dec 6 11:40:01] == Manager 'sendcron' logged off from 127.0.0.1
[Dec 6 11:40:02] == Manager 'sendcron' logged on from 127.0.0.1
[Dec 6 11:40:02] -- Called 8600054@default
[Dec 6 11:40:02] -- Executing [8600054@default:1] MeetMe("Local/8600054@default-000000ef;2", "8600054,F") in new stack
[Dec 6 11:40:02] -- Local/8600054@default-000000ef;1 answered
[Dec 6 11:40:02] -- Executing [90886004178@default:1] AGI("Local/8600054@default-000000ef;1", "agi://127.0.0.1:4577/call_log") in new stack
[Dec 6 11:40:02] -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=4002))
[Dec 6 11:40:02] -- <Local/8600054@default-000000ef;1>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Dec 6 11:40:02] -- Executing [90886004178@default:2] Dial("Local/8600054@default-000000ef;1", "DAHDI/g0/0886004178,,Tto") in new stack
[Dec 6 11:40:02] WARNING[36179][C-0000024b]: app_dial.c:2589 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 0 - Unknown)
[Dec 6 11:40:02] -- No devices or endpoints to dial (technology/resource)
[Dec 6 11:40:02] -- Executing [90886004178@default:3] Hangup("Local/8600054@default-000000ef;1", "") in new stack
[Dec 6 11:40:02] == Spawn extension (default, 90886004178, 3) exited non-zero on 'Local/8600054@default-000000ef;1'
[Dec 6 11:40:02] WARNING[36179][C-0000024b]: func_hangupcause.c:140 hangupcause_read: Unable to find information for channel
[Dec 6 11:40:02] -- Executing [h@default:1] AGI("Local/8600054@default-000000ef;1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CHANUNAVAIL---------------)") in new stack
[Dec 6 11:40:02] == Manager 'sendcron' logged on from 127.0.0.1
[Dec 6 11:40:02] -- Called 58600054@default
[Dec 6 11:40:02] -- Executing [58600054@default:1] MeetMe("Local/58600054@default-000000f0;2", "8600054,Fmq") in new stack
[Dec 6 11:40:02] -- Local/58600054@default-000000f0;1 answered
[Dec 6 11:40:02] -- Executing [8309@default:1] Answer("Local/58600054@default-000000f0;1", "") in new stack
[Dec 6 11:40:02] -- Executing [8309@default:2] Monitor("Local/58600054@default-000000f0;1", "wav,20211206-114002_0886004178") in new stack
[Dec 6 11:40:02] -- Executing [8309@default:3] Wait("Local/58600054@default-000000f0;1", "3600") in new stack
[Dec 6 11:40:02] -- <Local/8600054@default-000000ef;1>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ----------) completed, returning 0
[Dec 6 11:40:02] == Spawn extension (default, 8600054, 1) exited non-zero on 'Local/8600054@default-000000ef;2'
[Dec 6 11:40:02] WARNING[36180][C-0000024a]: func_hangupcause.c:140 hangupcause_read: Unable to find information for channel
[Dec 6 11:40:02] -- Executing [h@default:1] AGI("Local/8600054@default-000000ef;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------------)") in new stack
[Dec 6 11:40:02] -- <Local/8600054@default-000000ef;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ----------) completed, returning 0
[Dec 6 11:40:03] == Manager 'sendcron' logged off from 127.0.0.1
Vicibox 10
Version: 2.14b0.5
SVN Version: 3533
DB Schema Version: 1646
Cluster of 3 Servers
2 Dialer, 1Web/DB
worseo
 
Posts: 38
Joined: Sat Jul 10, 2021 6:46 am

Re: Calls from outbound campaign rejected

Postby carpenox » Mon Dec 06, 2021 11:12 pm

type dahdi_cfg -v
Alma Linux 8.5 | Version: 2.14-858a | BUILD: 220513-0819 | SVN Version: 3602 | DB Schema Version: 1661 | Asterisk 16.17.0-vici
www.CyburDial.net -:- 725-22-CYBUR -:- My Blog: http://vicidial.blog -:- Whatsapp: +19549477572 -:- Skype: live:carpenox_3
carpenox
 
Posts: 1848
Joined: Wed Apr 08, 2020 2:02 am
Location: Coral Springs, FL

Re: Calls from outbound campaign rejected

Postby ambiorixg12 » Wed Dec 08, 2021 8:23 pm

Unable to create channel of type 'DAHDI' (Cause 0 - Unknown)
This is most commonly caused by the absence of chan_dahdi module Run the command module load chan_dahdi.so within the Asterisk CLI to correct the problem. In the event that the module cannot be loaded, you will need to confirm if the module exist or check the module configuration for any issues.


https://support.digium.com/s/article/Un ... %20problem.
Asterisk and FreePBX expert / Twilio & PHP / Python MYSQL developer.

Personal site : http://asterisk-voip.com/
ambiorixg12
 
Posts: 431
Joined: Tue Sep 17, 2013 10:35 pm


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 37 guests