In-Group / Next agent call setting

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

In-Group / Next agent call setting

Postby tonywang » Tue Jan 05, 2010 10:07 am

Hi all, I have a scenario. I got first line agents & second line agents for inbound service. I would like to build a single in-group for both first line & second line agents. I use "inbound_group_rank" at Next agent call setting of In-Group. Define first line agents with higher priority, ie 9, and lower priority for the second line agents, ie 5, in order to let first line agents take calls first and the second line agnets take calls unless the first line agents are all fully occupied. What will be the call distribution method for those agnets with the same priority? What I am asking is how VICI dispatch the call to those first line agents with the same priority 9? What I am observed is random, is it? Thanks for any reply!
tonywang
 
Posts: 69
Joined: Wed Sep 02, 2009 10:13 am

Postby mflorell » Tue Jan 05, 2010 12:16 pm

It should be based upon the waiting time, or time since last call depending on the vicidial version.
mflorell
Site Admin
 
Posts: 17082
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Postby tonywang » Tue Jan 26, 2010 10:40 am

Hello matt, I test it and found the call will dispatch by agent id order, not random, not by waiting time. What will you suggest to do if I want first line agents & second line agents take call in the same in-group but dispatch call to first line agents in longest wait time and the call only dispatch to the second line agents in longest wait time when all first line agents were occupied? What I am using is 2.0.5. Million thanks for your advice!
tonywang
 
Posts: 69
Joined: Wed Sep 02, 2009 10:13 am

Postby mflorell » Tue Jan 26, 2010 10:52 am

Have you tried ranking your agents and using that as the Next Agent Call?
mflorell
Site Admin
 
Posts: 17082
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Postby tonywang » Tue Jan 26, 2010 11:07 am

If you mean "Inbound_group_ranking" in NEXT Agent Call, yes, I did it. I set agent 1, 2, 3 as the same rank, said 9 for ingroupA, agent 4,5 rank 5 for ingroupA. The call will dispatch to agent 1,2,3 first but in order of agent id, not longest wait time, then dispatch call to agent 4,5 whe 1,2,3 occupied. Do I miss-understand?
tonywang
 
Posts: 69
Joined: Wed Sep 02, 2009 10:13 am

Postby mflorell » Tue Jan 26, 2010 12:25 pm

That might be a bug actually, not sure if that was fixed in 2.2.0 or not. I will have to check.
mflorell
Site Admin
 
Posts: 17082
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: In-Group / Next agent call setting

Postby dspaan » Thu Dec 06, 2018 11:15 am

Hi Matt,

Do you if anything was ever found on this issue?

We also have ingroups with Next agent call inbound_group_rank setting and have multiple agents with rank 9 but it's always the same agent who gets the calls first and the others only get a call if that agent is busy. So there is no secondary next agent call method that sends the call to the longest agent waiting it seems.
Regards, Dennis

Vicibox 8.0.1
Version: 2.14b0.5
SVN Version: 2951
DB Schema Version: 1540
dspaan
 
Posts: 1046
Joined: Fri Aug 21, 2009 1:40 pm
Location: The Netherlands

Re: In-Group / Next agent call setting

Postby mflorell » Fri Dec 07, 2018 6:00 am

We did some testing on this for a client a few years ago and it did work exactly as it was supposed to for every call we looked up for the client.
mflorell
Site Admin
 
Posts: 17082
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: In-Group / Next agent call setting

Postby dspaan » Fri Dec 07, 2018 6:21 am

Can you recommend any steps i can take to verify things? Maybe a table i need to check or settings i need to change, possible conflicts or misconfigurations you can think of?
Regards, Dennis

Vicibox 8.0.1
Version: 2.14b0.5
SVN Version: 2951
DB Schema Version: 1540
dspaan
 
Posts: 1046
Joined: Fri Aug 21, 2009 1:40 pm
Location: The Netherlands

Re: In-Group / Next agent call setting

Postby williamconley » Fri Dec 07, 2018 11:22 am

You could start by posting a single example of an incorrect decision by the system, your configuration options and settings for at least two agents who were both logged in and READY at the moment of the error (ie: agent A should have received the call, but agent B received it instead), and the log associated with that decision for the time period involved.

Best would be to set up an actual test scenario and have no other traffic on the system (for you: since you may find your problem before you post, of course).
Vicidial Installation and Repair, plus Hosting and Colocation
SugarCRM integration - Customization and Add-ons - We Bring It All Together.
http://www.PoundTeam.com # 352-269-0000 # +44 (203) 769-2294 # +506 4001-8914
williamconley
 
Posts: 17717
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: In-Group / Next agent call setting

Postby dspaan » Fri Dec 07, 2018 11:26 am

Alright i will investigate and post back. Which log do you mean William?
Regards, Dennis

Vicibox 8.0.1
Version: 2.14b0.5
SVN Version: 2951
DB Schema Version: 1540
dspaan
 
Posts: 1046
Joined: Fri Aug 21, 2009 1:40 pm
Location: The Netherlands

Re: In-Group / Next agent call setting

Postby blackbird2306 » Sat Dec 08, 2018 7:47 am

Please confirm first you are setting the rank at the correct place. The inbound group rank should not be confused with the agent campaign rank.

Inbound group settings --> at the bottom "AGENT RANKS FOR THIS INBOUND GROUP"

As already suggested post a log from /var/log/astguiclient/agiout log file
Vicibox 6.0.2 from Vicibox_v.6.0.x86_64-6.0.2.iso | Vicidial 2.12-560a build: 160617-1427 | Asterisk 1.8.32.3
blackbird2306
 
Posts: 382
Joined: Mon Jun 23, 2014 5:31 pm


Return to Support

Who is online

Users browsing this forum: No registered users and 22 guests