modprobe zaptel

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

modprobe zaptel

Postby sharad » Sat Aug 05, 2006 1:50 am

HI

I am installing slackware 10.2. with kernal 2.4.31,
i installed all the packages of phase 3 of scratch installation,
now when i installed asterisk
i get the error while
giving cmd
modprobe wcfxo
i am using digiumcard X100P ,it was showing no such device exist
ERROR SHOWN BELOW::
root@asterisk:~# modprobe wcfxo
/lib/modules/2.4.31/misc/wcfxo.o: init_module: No such device
/lib/modules/2.4.31/misc/wcfxo.o: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.31/misc/wcfxo.o: insmod /lib/modules/2.4.31/misc/wcfxo.o failed
/lib/modules/2.4.31/misc/wcfxo.o: insmod wcfxo failed

OUTPUT OF LSPCI IS

root@asterisk:~# lspci
00:00.0 Host bridge: VIA Technologies, Inc. P4M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. P4M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. P4M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. P4M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. P4M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. P4M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:07.0 Communication controller: Motorola: Unknown device 5608
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Contro ller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A /C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controlle r (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controlle r (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controlle r (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controlle r (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T8 90 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01)





Thanks in advance
sharad
 
Posts: 36
Joined: Fri Jul 21, 2006 7:47 am

Postby mflorell » Sat Aug 05, 2006 6:58 am

Have you contacted the company that you purchased the X100P card from?

It is interesting that you are using a P4M800 motherboard. I have heard from two other users who had issues with that Via-based motherboard and X100P cards. Do you have another motherboard to try?
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida


Return to Support

Who is online

Users browsing this forum: Google [Bot] and 78 guests