alternative digium card?

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

alternative digium card?

Postby mel0683 » Wed Feb 14, 2007 1:33 pm

hi guys

what alternative digium card aside to this one?Digium Wildcard Single Span T1 Card T100P..

thank u.
beginner
mel0683
 
Posts: 20
Joined: Fri Feb 02, 2007 1:20 pm

Postby mflorell » Wed Feb 14, 2007 10:24 pm

The T100P has been retired, and the replacement is the TE110P.

The alternatives to using Digium cards are Sangoma a101 and Rhino single T1 card.
mflorell
Site Admin
 
Posts: 18334
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Postby mel0683 » Thu Feb 15, 2007 2:04 pm

how about X100P?this specs Asterisk OEM X100P FXO PCI Card
co'z i purchased this device.its possible to run in vicidial?

thanks
mel0683
 
Posts: 20
Joined: Fri Feb 02, 2007 1:20 pm

Postby mflorell » Thu Feb 15, 2007 3:31 pm

The X100P card is only an analog POTS line card, not a T1/E1 card. But if you just need a timer for zaptel/meetme, it will work very well.
mflorell
Site Admin
 
Posts: 18334
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Postby mel0683 » Thu Feb 15, 2007 6:09 pm

really its only used for timer of zaptel/meetme only?
so what device can i use to setup a vicidial to have a predictive dialer?
mel0683
 
Posts: 20
Joined: Fri Feb 02, 2007 1:20 pm

Postby mflorell » Fri Feb 16, 2007 12:10 am

For only a timer, then the X100P card will work great. I recommend getting them on ebay or x100p.com
mflorell
Site Admin
 
Posts: 18334
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

DIALOGIC CARDS

Postby eijal » Wed Mar 07, 2007 5:51 pm

What about dialogic cards?
I have one, but I only found that it works with special drivers from DIGIUM (paying). I was looking how to buy that driver, but I can't find anything.
Anyone has experience with this cards (just for timer) my model is: D/41JCT-LS.

PD.
I want to use it only like a timer
eijal
 
Posts: 186
Joined: Thu Feb 08, 2007 6:34 pm

Postby Op3r » Wed Mar 07, 2007 6:23 pm

Just buy an x100p for your timer needs. its cheap it cost like 15 to 30 usd
Get paid for US outbound Toll Free calls. PM me.
Op3r
 
Posts: 1424
Joined: Wed Jun 07, 2006 7:53 pm
Location: Manila

Postby eijal » Thu Mar 08, 2007 12:22 pm

Op3r wrote:Just buy an x100p for your timer needs. its cheap it cost like 15 to 30 usd


I have a x100p card, but the problem is that it doesn't feet on my PCI 3.3v interfaces. And it's too expensive to buy a E1/T1 card from DIGIUM, just for timer
:?
eijal
 
Posts: 186
Joined: Thu Feb 08, 2007 6:34 pm

Postby gerski » Thu Mar 08, 2007 2:37 pm

Why not use an old pc (p3 or older) and use ur x100p if ur just trying to install it. that way it is much cheaper than buying a T1/E1 card...
gerski
 
Posts: 432
Joined: Fri Jul 14, 2006 6:21 am

Postby Op3r » Thu Mar 08, 2007 2:48 pm

or change your motherboard.
Get paid for US outbound Toll Free calls. PM me.
Op3r
 
Posts: 1424
Joined: Wed Jun 07, 2006 7:53 pm
Location: Manila

Postby eijal » Thu Mar 08, 2007 4:26 pm

I can't use a P3 or an old motherboard, because I am designing a predictive dialer for 15 agent. And imposible that a P3 or an old motherboard can support that load
eijal
 
Posts: 186
Joined: Thu Feb 08, 2007 6:34 pm

Postby Op3r » Thu Mar 08, 2007 8:41 pm

then buy a new motherboard.

a new motherboard only cost like 300 usd (which is a very good one)
Get paid for US outbound Toll Free calls. PM me.
Op3r
 
Posts: 1424
Joined: Wed Jun 07, 2006 7:53 pm
Location: Manila


Return to Support

Who is online

Users browsing this forum: Google [Bot] and 48 guests