Error Call Rejected: CHANUNAVAIL Cause: 1 - Unallocated

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Error Call Rejected: CHANUNAVAIL Cause: 1 - Unallocated

Postby zencom » Tue Aug 15, 2017 10:37 pm

ViciBox v.7.0.4-170113
Asterisk 11.25.1-vici
opensuse 4.1.39-56-default
supermicro A1SAi & A1SRi Series motherboard supports a next-generation Intel® C2000 SoC (System-on-a-Chip) processor in an FCBGA package. With a C2000 Series processor built in, the A1SAi/A1SRi , 8gb ECC SODIMM,

Hello guys new to this forum

I get the Following error message
DIAL ALERT:
Call Rejected: CHANUNAVAIL
Cause: 1 - Unallocated (unassigned) number.
SIP: 404 - Not Found

I tried doing manual dial and dialing and tried dialing from x-lite got same error message ,disabled firewall on the router and also firewall in linux, my trunk and carrier settings look good had them checked by carrier who confirmed they were good. Been stuck for days on this one any help would be appreciated


[Aug 15 22:29:28] == Manager 'sendcron' logged on from 127.0.0.1
[Aug 15 22:29:28] -- Executing [8600051@default:1] MeetMe("Local/8600051@default-00000001;2", "8600051,F") in new stack
[Aug 15 22:29:28] > Channel Local/8600051@default-00000001;1 was answered
[Aug 15 22:29:28] -- Executing [91718XXXXXXX@default:1] AGI("Local/8600051@default-00000001;1", "agi://127.0.0.1:4577/call_log") in new stack
[Aug 15 22:29:28] -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=0001))
[Aug 15 22:29:28] -- <Local/8600051@default-00000001;1>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Aug 15 22:29:28] -- Executing [917185595783@default:2] Dial("Local/8600051@default-00000001;1", "SIP/718XXXXXXX@001,,or") in new stack
[Aug 15 22:29:28] == Using SIP RTP CoS mark 5
[Aug 15 22:29:28] -- Called SIP/718XXXXXXX@001
[Aug 15 22:29:29] == Manager 'sendcron' logged off from 127.0.0.1
[Aug 15 22:29:29] == Everyone is busy/congested at this time (1:0/0/1)
[Aug 15 22:29:29] -- Executing [91718XXXXXXX@default:3] Hangup("Local/8600051@default-00000001;1", "") in new stack
[Aug 15 22:29:29] == Spawn extension (default, 91718XXXXXXX, 3) exited non-zero on 'Local/8600051@default-00000001;1'
[Aug 15 22:29:29] -- Executing [h@default:1] AGI("Local/8600051@default-00000001;1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----1-----CHANUNAVAIL----------") in new stack
[Aug 15 22:29:29] -- <Local/8600051@default-00000001;1>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
[Aug 15 22:29:29] == Spawn extension (default, 8600051, 1) exited non-zero on
'Local/8600051@default-00000001;2'
[Aug 15 22:29:29] -- Executing [h@default:1] AGI("Local/8600051@default-00000001;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
[Aug 15 22:29:29] -- <Local/8600051@default-00000001;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
[Aug 15 22:29:32] NOTICE[8146][C-00000001]: res_rtp_asterisk.c:4519 ast_rtp_read: Unknown RTP codec 126 received from '192.168.0.226:50150'
[Aug 15 22:29:37] NOTICE[8146][C-00000001]: res_rtp_asterisk.c:4519 ast_rtp_read: Unknown RTP codec 126 received from '192.168.0.226:50150'.
zencom
 
Posts: 1
Joined: Thu Aug 10, 2017 10:33 pm

Re: Error Call Rejected: CHANUNAVAIL Cause: 1 - Unallocated

Postby felipecl » Fri Aug 25, 2017 8:49 am

What is your dialplan?

PS: you can put the log and those things inside the code bracket. As they do not all understand English very well, I think it helps.
felipecl
 
Posts: 6
Joined: Fri Aug 11, 2017 10:56 am


Return to Support

Who is online

Users browsing this forum: No registered users and 102 guests