Transfer List with DISPO to new server

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Transfer List with DISPO to new server

Postby maykelsoft » Tue Oct 10, 2017 9:28 pm

Hi,

Currently, we are using Vicidial version from this installer: Vicibox_v.6.0.x86_64-6.0.3.preload.iso

And we are planning to upgrade to Vicidial version from this installer: ViciBox_v8.x86_64-8.0.1.iso

We just want to transfer LIST with DISPO and all other configuration will be done manually. Is there an easy way to do this instead on manually inserting on the new DB?

Please advise.

Thanks in advance.

Mike
ViciBox_v.7.x86_64-7.0.4.iso | Single Server | No Extra Hardware/Software installed
Starting to upgrade to ViciBox_v8_1.x86_64-8.1.2
maykelsoft
 
Posts: 61
Joined: Thu Jan 14, 2010 3:28 pm

Re: Transfer List with DISPO to new server

Postby mflorell » Wed Oct 11, 2017 5:00 am

Do a mysqldump of the vicidial_list table on the old system, then run that dump on the new system. Should be fairly simple if all you want is the lead data.
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Transfer List with DISPO to new server

Postby maykelsoft » Wed Oct 11, 2017 8:22 am

Hi Matt, it will include all the STATUSES of each leads? Thanks for the help
ViciBox_v.7.x86_64-7.0.4.iso | Single Server | No Extra Hardware/Software installed
Starting to upgrade to ViciBox_v8_1.x86_64-8.1.2
maykelsoft
 
Posts: 61
Joined: Thu Jan 14, 2010 3:28 pm

Re: Transfer List with DISPO to new server

Postby mflorell » Wed Oct 11, 2017 9:15 am

"status" is a field in vicidial_list, so if you move the whole table over, that field will go too.
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Transfer List with DISPO to new server

Postby maykelsoft » Mon Oct 16, 2017 2:01 pm

Thanks Matt! Sorry for late response... just got busy upgrading some servers to new hardware... will update this thread of status of DB transfer... Once again thanks for all the help.. ;-)
ViciBox_v.7.x86_64-7.0.4.iso | Single Server | No Extra Hardware/Software installed
Starting to upgrade to ViciBox_v8_1.x86_64-8.1.2
maykelsoft
 
Posts: 61
Joined: Thu Jan 14, 2010 3:28 pm

Re: Transfer List with DISPO to new server

Postby maykelsoft » Tue Oct 17, 2017 7:57 am

Hi Matt, Just an update... it works. After fresh installed of Vicibox 8.0 and insert vicidial_list table to the asterisk... I just need to manually create list id on web interface to populate the data with statuses... Thanks for the help. Cheers!
ViciBox_v.7.x86_64-7.0.4.iso | Single Server | No Extra Hardware/Software installed
Starting to upgrade to ViciBox_v8_1.x86_64-8.1.2
maykelsoft
 
Posts: 61
Joined: Thu Jan 14, 2010 3:28 pm

Re: Transfer List with DISPO to new server

Postby mflorell » Tue Oct 17, 2017 9:20 am

Thanks for the post-back!
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida


Return to Support

Who is online

Users browsing this forum: No registered users and 83 guests