Length_in_sec vs customer time or Answer time

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Length_in_sec vs customer time or Answer time

Postby lvish » Mon Dec 04, 2017 4:32 am

Hi

We recently moved from older version 2.12 to latest 2.14 . We are observing there is a huge gap between Length in seconds and actual talk time.
I believe that length in seconds starts when lead is dialed by agent and ends when Agent disposes the call. But there are cases where Answer time is Zero by Length in seconds is around 3000 seconds.

Agent Stats report show that agent has taken other calls just after few minutes. In some cases Pause seconds are updated in Leads Length in seconds.These entries are random.

Issue was not there in older version 2.12. Is there any known issues or work around available ?

thanks in advance.


lvish
VERSION: 2.14-630a
BUILD: 170923-1425 | Dell R620 -- 16Gb ram, | All in one server,| PRI card| Vicibox 7.0.3|
lvish
lvish
 
Posts: 103
Joined: Tue Jan 25, 2011 4:56 am

Re: Length_in_sec vs customer time or Answer time

Postby lvish » Mon Dec 04, 2017 9:57 am

One more observation is in vicidial_log, start_epoch and end_epoch has same value but length_in_sec is not equal to zero. In some cases pause_sec value of agent previous stat is populated in length_in_sec.
lvish
lvish
 
Posts: 103
Joined: Tue Jan 25, 2011 4:56 am

Re: Length_in_sec vs customer time or Answer time

Postby mflorell » Mon Dec 04, 2017 1:44 pm

Is the AST_cleanup_agent_log.pl script in your crontab running every night?
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Length_in_sec vs customer time or Answer time

Postby lvish » Tue Dec 05, 2017 12:40 am

Yes , its deault crontab of vicbox 7.0.3 no changes done.
lvish
lvish
 
Posts: 103
Joined: Tue Jan 25, 2011 4:56 am

Re: Length_in_sec vs customer time or Answer time

Postby mflorell » Tue Dec 05, 2017 6:49 am

Do these logging anomalies change at all from the current day to the next day, after that script runs?
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Length_in_sec vs customer time or Answer time

Postby lvish » Tue Dec 05, 2017 9:45 pm

Hi

No changes even after script runs.


regds
lvish
lvish
 
Posts: 103
Joined: Tue Jan 25, 2011 4:56 am

Re: Length_in_sec vs customer time or Answer time

Postby mflorell » Wed Dec 06, 2017 5:56 pm

Is this on manual dial calls, or auto-dial calls or both?

What is the vicidial.php version and build?

Have you enabled Agent Screen Debug Logging in System Settings?
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Length_in_sec vs customer time or Answer time

Postby lvish » Thu Dec 07, 2017 7:10 am

This is on a manual dial call through API, agent clicks on a call button on external CRM which triggers manua dial agent API.

We will enable agent screen debug logging and check the logs.


thanks for pointer

regards

lvish
lvish
lvish
 
Posts: 103
Joined: Tue Jan 25, 2011 4:56 am

Re: Length_in_sec vs customer time or Answer time

Postby sunilkumarmehta » Wed Aug 23, 2023 9:22 am

Even we are facing same issue in manual as well auto mode. Vicidial version is 2.14. Its running on load balancing enviroment with multiple servers.
sunilkumarmehta
 
Posts: 6
Joined: Thu Apr 09, 2015 2:56 am

Re: Length_in_sec vs customer time or Answer time

Postby martinch » Wed Aug 23, 2023 3:59 pm

Is it possible to share some examples with us? You can scrub the phone numbers.

This is related to `asterisk.vicidial_log` right? As in length_in_sec (this appears in multiple tables.

What does "Answer Time" refer to? Which column on report/table?

Same for customer time.

Also, if possible, could you also provide a log entry for start_epoch = end_epoch too and we'll try to assist :)

Thank you,
Martin.
Project Lead @ mDial -> https://github.com/TheBlode/mDial
martinch
 
Posts: 273
Joined: Thu Nov 15, 2018 9:14 am
Location: England, UK


Return to Support

Who is online

Users browsing this forum: No registered users and 81 guests