Problem to add carrier

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Problem to add carrier

Postby juanykty » Sat Sep 15, 2018 3:27 pm

Hello I have a problen when I try add a carrier
the carrier is Broadband Dynamics
we have this info and I want create the carrier on vicidial
VERSION: 2.14-632a
BUILD: 170930-0853

Session 175XXXXXXX-106XXXXXXX@8.XX.XX.XX, Release Cause (code) = 0405
Termination Stack Cause = 504, INVITE Response Timeout
Start = Fri Sep 14 22:41:07 2018
Answer = NA
Release = Fri Sep 14 22:41:11 2018
Duration = 0
Post Dial Delay (sec) = 4
Termination Post Dial Delay (msec) = 4060
Ring Time = 0
Media = WithMedia

Orig TID = 001077, Proc_SIP
ANI = 602XXXXXX, From = xxxxxxxxxxxxx
DNIS = +1855XXXXXX, To = 8.XX.XX.XX
RN = N/A
Call Leg ID = 4362XXXX_11315XXXX@xxxxxxxxxxxxxxx
Media IP:UDP = xxxxxxxxxxxx:44154
Switched IP:UDP = 8.XX.XX.XX:28020
Codec List = G.729,G.711u_64k,G.711a_64k,RFC 2833

Term TID = 0075XX, Proc_SIP
ANI = 6025XXXXXX, From = 8.XX.XX.XX
DNIS = 8552XXXXXX, To = 189.198.XX.XX
RN = N/A
Call Leg ID = 175303XXXX-0-10671XXXXX@8.XX.XX.XX
Media IP:UDP = 0.0.0.0:0
Switched IP:UDP = 8.XX.XX.XX:28022
Codec List = NA

Routed Digits = 8552XXXXX
Route Selection = 1, Final Call Indication = F OLI = 62
CNAM Dipped : No LNP Dipped : No ERS Dipped : No
ERS Route Table : 0 , Sequence: 0 , Jurisdiction: 0
Matched ERS Digits =
Orig: Pkt In = 0, Pkt Out = 0, Byte In = 0, Byte Out = 0, MOS = 0.0
Term: Pkt In = 0, Pkt Out = 0, Byte In = 0, Byte Out = 0, MOS = 0.0
juanykty
 
Posts: 2
Joined: Mon Jan 08, 2018 12:28 pm

Return to Support

Who is online

Users browsing this forum: Majestic-12 [Bot] and 20 guests