Problem to add carrier

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Problem to add carrier

Postby juanykty » Sat Sep 15, 2018 3:27 pm

Hello I have a problen when I try add a carrier
the carrier is Broadband Dynamics
we have this info and I want create the carrier on vicidial
VERSION: 2.14-632a
BUILD: 170930-0853

Session 175XXXXXXX-106XXXXXXX@8.XX.XX.XX, Release Cause (code) = 0405
Termination Stack Cause = 504, INVITE Response Timeout
Start = Fri Sep 14 22:41:07 2018
Answer = NA
Release = Fri Sep 14 22:41:11 2018
Duration = 0
Post Dial Delay (sec) = 4
Termination Post Dial Delay (msec) = 4060
Ring Time = 0
Media = WithMedia

Orig TID = 001077, Proc_SIP
ANI = 602XXXXXX, From = xxxxxxxxxxxxx
DNIS = +1855XXXXXX, To = 8.XX.XX.XX
RN = N/A
Call Leg ID = 4362XXXX_11315XXXX@xxxxxxxxxxxxxxx
Media IP:UDP = xxxxxxxxxxxx:44154
Switched IP:UDP = 8.XX.XX.XX:28020
Codec List = G.729,G.711u_64k,G.711a_64k,RFC 2833

Term TID = 0075XX, Proc_SIP
ANI = 6025XXXXXX, From = 8.XX.XX.XX
DNIS = 8552XXXXXX, To = 189.198.XX.XX
RN = N/A
Call Leg ID = 175303XXXX-0-10671XXXXX@8.XX.XX.XX
Media IP:UDP = 0.0.0.0:0
Switched IP:UDP = 8.XX.XX.XX:28022
Codec List = NA

Routed Digits = 8552XXXXX
Route Selection = 1, Final Call Indication = F OLI = 62
CNAM Dipped : No LNP Dipped : No ERS Dipped : No
ERS Route Table : 0 , Sequence: 0 , Jurisdiction: 0
Matched ERS Digits =
Orig: Pkt In = 0, Pkt Out = 0, Byte In = 0, Byte Out = 0, MOS = 0.0
Term: Pkt In = 0, Pkt Out = 0, Byte In = 0, Byte Out = 0, MOS = 0.0
juanykty
 
Posts: 2
Joined: Mon Jan 08, 2018 12:28 pm

Re: Problem to add carrier

Postby omarrodriguezt » Tue Feb 19, 2019 10:35 am

Ask them if they need to add your server public IP address before continue.
http://www.ITContinental.com
Dedicated USA Servers - Vicibox - Vicidial - Limesurvey - Vtiger CRM - More than 15 years experience - Hablamos Español
omarrodriguezt
 
Posts: 667
Joined: Fri Jun 05, 2009 12:22 pm
Location: Dominican Republic

Re: Problem to add carrier

Postby williamconley » Mon May 20, 2019 11:59 am

so ... you didn't even take a shot at it? just tossed it up here and said "please do this for me"?

I only have one answer for that: Here is our basic template. Make some changes and see how it goes. On the first run, usually you only need the carrier's outbound calling IP address in place of "carrierIPorDomain".

Account Entry:
Code: Select all
[carriername]
type=friend
dtmfmode=auto
host=carrierIPorDomain
context=trunkinbound
allow=all
insecure=port,invite
canreinvite=no
nat=no
rtpkeepalive=600


Protocol: SIP

Globals String: CARRIERVARIABLE = SIP/carriername

Dialplan Entry:

Code: Select all
exten=>_91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten=>_91NXXNXXXXXX,n,Dial(${CARRIERVARIABLE}/${EXTEN:1},,To)
exten=>_91NXXNXXXXXX,n,Hangup


Active: Y

After you try changing the host value, post an Asterisk CLI example of an attempted call if it fails. Beginning to end.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)


Return to Support

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 63 guests