Help required for installing & configuring Cepstral TTS

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Help required for installing & configuring Cepstral TTS

Postby prashant3s@yahoo.com » Tue Nov 27, 2018 12:06 am

Dear All ,
I have purchased Cepstal TTS - Alison voice with ports. However i have difficulty configuring the same.. As the voice file played is going Blank always.

Request you to kindly help me provide me some help installing & configure Alison voice asap.

VICIDIAL server details & its configuration
1)Site from where i downloaded & install Vicibox server http://www.vicibox.com/server/index.html
2)Telephony Hardware : Dinstar GSM gateway (Model No DWG 2000F)
3) Server Config : Physical server Intel 3.2 GHz, 16 GB RAM, Motherboard S1200V3RP
4) Vicibox server version : ViciBox v.8.1.2
5) No other software installed ( Running only vicibox server)
6) OpenSuSE Leap v.42.3 64-bit
7) Asterisk v.13

I have purchased Cepstral Alison Voice, port and save to file licenses however I am not able to use the TTS feature on Vicidial. Have installed the voice, port and and save to file and all files seems to be installed properly but the TTS is not able to be called from Vicidial.

Response for Swift -V shows response as
Cepstral Swift v6.0.1, March 2012

Default Voice: Allison-8kHz v6.0.0
Language: US English v5.1.0
Lexicon: unknown v0.0.0

Concurrency: 1 Port(s) Registered
0 Port(s) In Use

Distribution: No audio distribution license was found.
Saving audio to a file is disabled.

Copyright (C) 2000-20012, Cepstral LLC.waiting your early revert & support.


Can someone please help me get the installation steps for configuring Cepstral Alison voice in Vicidial

Thanks & Regards
Prashant
+91 808 262 77 55
prashant3s@yahoo.com
Last edited by prashant3s@yahoo.com on Mon Jan 21, 2019 7:41 am, edited 4 times in total.
prashant3s@yahoo.com
 
Posts: 26
Joined: Fri Aug 17, 2018 2:54 pm

Re: Pls send me your lowest & best quote

Postby blackbird2306 » Tue Nov 27, 2018 10:33 am

Lowest and best seems for me mutually incompatible. But our best men in town for this are the Vicidial Group (sales@vicidial.com) or William Conley @Poundteam (http://www.poundteam.com --> Catalog)
Vicibox 6.0.2 from Vicibox_v.6.0.x86_64-6.0.2.iso | Vicidial 2.12-560a build: 160617-1427 | Asterisk 1.8.32.3
blackbird2306
 
Posts: 409
Joined: Mon Jun 23, 2014 5:31 pm

Re: Pls send me your lowest & best quote

Postby mflorell » Wed Nov 28, 2018 6:59 am

This quote request seems to ignore that you can do custom fields in VICIdial. If you use custom vicidial list fields, do you still need a separate CRM?
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Pls send me your lowest & best quote

Postby williamconley » Thu Nov 29, 2018 2:04 pm

mflorell wrote:This quote request seems to ignore that you can do custom fields in VICIdial. If you use custom vicidial list fields, do you still need a separate CRM?

Alas yes: Vicidial still has a 1:1 relationship with its custom fields

1 record per lead violates both "normalization" rules for database management and the reality of many requirements for an unpredictable number of records in possibly multiple categories. So Vicidial Custom Fields can delay the CRM requirement, but can't eliminate it entirely.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Pls send me your lowest & best quote

Postby williamconley » Thu Nov 29, 2018 2:05 pm

blackbird2306 wrote:Lowest and best seems for me mutually incompatible. But our best men in town for this are the Vicidial Group (sales@vicidial.com) or William Conley @Poundteam (http://www.poundteam.com --> Catalog)

The sign on my wall from back in the 90s (still have it around here somewhere): Good / Fast / Cheap: Pick Two!

So this Prashant wants a project that will run for a very long time (used as filler?) to get Good and Cheap. We have many clients in our Standard Service Level who do just that. When Budget is King, but it must still work perfectly, the result is a Very Long Production Run.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Help required for installing & configuring Cepstral TTS

Postby prashant3s@yahoo.com » Fri Jan 18, 2019 10:58 am

Dear All,

I have purchased Cepstral Voice, ports & save to file licenses from Cepstral for TTS configuration with Vicidial. However I am having difficulties installing and configuring TTS on Vicidial. Allison voice, ports are installed but after downloading and installing apt_swift it is not show in the asterisk folder neither the TTS is not been played properly.

Can someone help me with the steps for getting the Cepstral TTS configured in vicidial
prashant3s@yahoo.com
 
Posts: 26
Joined: Fri Aug 17, 2018 2:54 pm

Re: Help required for installing & configuring Cepstral TTS

Postby prashant3s@yahoo.com » Fri Jan 18, 2019 11:06 am

I have purchased Cepstral Alison Voice, port and save to file licenses however I am not able to use the TTS feature on Vicidial. Have installed the voice, port and and save to file and all files seems to be installed properly but the TTS is not able to be called from Vicidial.

Response for Swift -V shows response as
Cepstral Swift v6.0.1, March 2012

Default Voice: Allison-8kHz v6.0.0
Language: US English v5.1.0
Lexicon: unknown v0.0.0

Concurrency: 1 Port(s) Registered
0 Port(s) In Use

Distribution: No audio distribution license was found.
Saving audio to a file is disabled.

Copyright (C) 2000-20012, Cepstral LLC.waiting your early revert & support.


Can someone please help me get the installation steps for configuring Cepstral Alison voice in Vicidial

Thanks & Regards
Prashant
+91 808 262 77 55
prashant3s@yahoo.com
 
Posts: 26
Joined: Fri Aug 17, 2018 2:54 pm

Re: Help required for installing & configuring Cepstral TTS

Postby prashant3s@yahoo.com » Fri Jan 18, 2019 11:12 am

I have now purchased save to file license as well now it's showing installed but still the voice is not played. Having issue with
Problem installing Cepstral TTS Configure with vicidial 8.1.2

I m having issue with app_swift package issue i m trying download from git clone but in that
app_swift/Asterisk , there is no directory called asterisk. . plz provide step by step installation for cepstral Alison 8kz that i have purchase licence
prashant3s@yahoo.com
 
Posts: 26
Joined: Fri Aug 17, 2018 2:54 pm

Re: Help required for installing & configuring Cepstral TTS

Postby williamconley » Fri Jan 18, 2019 11:57 am

prashant3s@yahoo.com wrote:I have now purchased save to file license as well now it's showing installed but still the voice is not played. Having issue with
Problem installing Cepstral TTS Configure with vicidial 8.1.2

I m having issue with app_swift package issue i m trying download from git clone but in that
app_swift/Asterisk , there is no directory called asterisk. . plz provide step by step installation for cepstral Alison 8kz that i have purchase licence

Cepstral will have installation instructions for every version of asterisk with which their software is compatible. They have your money, and this is a specifically Asterisk-based product. I bet they also have free support for immediately after purchase.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Help required for installing & configuring Cepstral TTS

Postby prashant3s@yahoo.com » Fri Jan 18, 2019 1:14 pm

Spoke to their customer service team they informed for configuring it inà Vicidial u need to seek help from Vicidial forum such has been their reply. I am chasing them since last 1 week. Very unprofessional. After purchasing their product as well they don't have the steps for installing and configuring in vicidial. They have been referring to install app_swift from 3 party server namely
from github, but after downloading the asterisk folder is missing in app_ Swift as mentioned in their standard installation procedure and they have repeatedly asking to contact vicidial
prashant3s@yahoo.com
 
Posts: 26
Joined: Fri Aug 17, 2018 2:54 pm

Re: Help required for installing & configuring Cepstral TTS

Postby williamconley » Fri Jan 18, 2019 1:46 pm

prashant3s@yahoo.com wrote:Spoke to their customer service team they informed for configuring it inà Vicidial u need to seek help from Vicidial forum such has been their reply. I am chasing them since last 1 week. Very unprofessional. After purchasing their product as well they don't have the steps for installing and configuring in vicidial. They have been referring to install app_swift from 3 party server namely
from github, but after downloading the asterisk folder is missing in app_ Swift as mentioned in their standard installation procedure and they have repeatedly asking to contact vicidial

You're asking the wrong question. You're not installing and configuring it in Vicidial. Your installing it in ASTERISK. That's why they blew you off.

Once you get it installed and functioning in asterisk, we'll be able to help you out. But first it must work in the version of asterisk you are using. We've installed it in several versions, but I don't think we've installed it in asterisk 11 yet.

PS: You did not post your Vicidial Version with Build. Posting your installer version is nice, but ANY version of Vicidial can technically be installed with that installer. So please remember to post your Full Vicidial Version with Build. In this case, posting your Asterisk Version wouldn't be a bad idea either.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Help required for installing & configuring Cepstral TTS

Postby prashant3s@yahoo.com » Fri Jan 18, 2019 2:06 pm

I am using Viibox 8.1.2, build $build = '181116-1133' and asterisk 13.

I spoke to Cepstral they have run a few command and have informed its installed and working fine in asterisk and to check with vicidial forum for getting it configured /working with Vicidial

swift -V

Cepstral Swift v6.0.1, March 2012

Default Voice: Allison-8kHz v6.0.0
Language: US English v5.1.0
Lexicon: unknown v0.0.0

Concurrency: 1 Port(s) Registered
0 Port(s) In Use

Distribution: Your audio distribution license is active.
Saving audio to a file is enabled.
prashant3s@yahoo.com
 
Posts: 26
Joined: Fri Aug 17, 2018 2:54 pm

Re: Help required for installing & configuring Cepstral TTS

Postby williamconley » Fri Jan 18, 2019 2:16 pm

now that's some progress.

You did, however, skip your Vicidial Version (although you included the build, lol). Vicibox 8.1.2 is the version for the installer, which is NOT Vicidial. Vicidial will be more like 2.14.xxx.

Now go here:

http://www.vicidial.org/VICIDIALforum/v ... 879#p88879
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Help required for installing & configuring Cepstral TTS

Postby prashant3s@yahoo.com » Fri Jan 18, 2019 2:34 pm

Ok..I have run this command and am pasting the output below

Dialer:~ # asterisk -rx "core show application swift"
Your application(s) is (are) not registered
Command 'core show application swift' failed.
You have new mail in /var/mail/root...

Dialer:~ # rpm -qa | grep asterisk
asterisk-perl-0.08-2.1.noarch
asterisk-sounds-base-13.21.1-6.17.noarch
asterisk-snmp-13.21.1-6.17.x86_64
libasteriskssl1-13.21.1-6.17.x86_64
asterisk-dahdi-13.21.1-6.17.x86_64
asterisk-moh-base-13.21.1-6.17.noarch
asterisk-13.21.1-6.17.x86_64


What next?
prashant3s@yahoo.com
 
Posts: 26
Joined: Fri Aug 17, 2018 2:54 pm

Re: Help required for installing & configuring Cepstral TTS

Postby williamconley » Fri Jan 18, 2019 2:52 pm

mflorell wrote:Vicidial uses Cepstral in batch mode, not directly through Asterisk. It will work if the swift module is not activated.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Help required for installing & configuring Cepstral TTS

Postby prashant3s@yahoo.com » Fri Jan 18, 2019 3:13 pm

Would really appreciate if could elaborate further on further steps to get this sorted.

Thank you in advance for your support.
prashant3s@yahoo.com
 
Posts: 26
Joined: Fri Aug 17, 2018 2:54 pm

Re: Help required for installing & configuring Cepstral TTS

Postby williamconley » Fri Jan 18, 2019 3:27 pm

did you read the instructions in the other post to which i gave you a link?
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Help required for installing & configuring Cepstral TTS

Postby prashant3s@yahoo.com » Fri Jan 18, 2019 3:49 pm

Yes..But couldnt gather much. Sorry ...

Would appreciate if you could elaborate a little more sir.. By which i can follow your instructions & get this sorted please
prashant3s@yahoo.com
 
Posts: 26
Joined: Fri Aug 17, 2018 2:54 pm

Re: Help required for installing & configuring Cepstral TTS

Postby williamconley » Fri Jan 18, 2019 4:50 pm

prashant3s@yahoo.com wrote:Yes..But couldnt gather much. Sorry ...

Would appreciate if you could elaborate a little more sir.. By which i can follow your instructions & get this sorted please

Did you read in that post where it mentioned the Manual? Which was written to avoid having to reprint the instructions in this forum for everyone? Kinda the purpose of the manual. Did you try what the manual said to do?
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Help required for installing & configuring Cepstral TTS

Postby prashant3s@yahoo.com » Sun Jan 20, 2019 11:11 am

We have so far followed everything written in the manual, but it's still not working
prashant3s@yahoo.com
 
Posts: 26
Joined: Fri Aug 17, 2018 2:54 pm

Re: Help required for installing & configuring Cepstral TTS

Postby williamconley » Sun Jan 20, 2019 12:26 pm

prashant3s@yahoo.com wrote:We have so far followed everything written in the manual, but it's still not working

Ah, that's the part where you get vague in what you've done, but ask for help in doing "everything".

For us to help you, you should (seriously) post all the steps you've taken, including any changes to configuration you have made in the web gui (don't post entire configuration files or web pages, just the changes you've made). If you also post the manual vesion and page where you got the instructions, that would help us know what you have attempted and whether you misinterpreted anything.

Please note that the BEST way to get help on this site is to provide as much relevant detail as possible so us lazy people can help you as easily as possible. If we look at your request and realize that the only way to help you is to write you a book covering every possible angle, we generally just move on to the next post (as time providing free help is rather limited). We want to help, but we want to help as many as possible within our limited time.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Help required for installing & configuring Cepstral TTS

Postby prashant3s@yahoo.com » Mon Jan 21, 2019 7:49 am

williamconley wrote:
mflorell wrote:Vicidial uses Cepstral in batch mode, not directly through Asterisk. It will work if the swift module is not activated.


How do we use Cepstral in batch mode & how to keep the swift mode inactive?? Pls provide the steps to do the same or send me the link where the steps are been provided..

Thanks ...
prashant3s@yahoo.com
 
Posts: 26
Joined: Fri Aug 17, 2018 2:54 pm

Re: Help required for installing & configuring Cepstral TTS

Postby williamconley » Mon Jan 21, 2019 3:41 pm

Let's start here: You said you already performed the steps in the manual. What steps would those be?
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Help required for installing & configuring Cepstral TTS

Postby prashant3s@yahoo.com » Tue Jan 22, 2019 12:43 am

Hello William,

I have follow the below URL forinstallation of cepstral

"https://www.cepstral.com/downloads/installers/linux64/Cepstral_Allison-8kHz_x86-64-linux_6.0.1.tar.gz"
1-Download your desired voice from our Downloads area.
2-Extract the archive, e.g. tar -xvzf Cepstral_Allison-8kHz_x86-64- linux_6.0.1.tar.gz
3-Change directory to the extracted directory, e.g. cd Cepstral_Allison- 8kHz_x86-64-linux_6.0
4-Run the install script with elevated privileges, e.g. sudo sh install.sh
Enter Your Voice Activation Key
swift --reg-voice
Enter Concurrency port activation key
sudo swift --reg-ports
Enter a Save to File Activation key
sudo swift --reg-filewrite

Installed a version of Asterisk and at least one Cepstral 6 telephony voice.
Download the app_swift archive: git clone https://github.com/jkister/app_swift
Change directory to the appropriate app_swift for the installed version of Asterisk:
cd app_swift/Asterisk_10 or cd app_swift/Asterisk_1.8 or cd app_swift/Asterisk_1.6

Here IS the issue In app_swift I can not find app_swift/Asterisk13

Here is not showing Directory of asterisk

I have setup two users on two softphones , defined these two users and their extension numbers in the "sip.conf",

[1000]
type=friend
host=dynamic
secret=1234
context=in_office

[2000]
type=friend
host=dynamic
secret=1234
context=in_office

In dialplan "extensions.conf", I have

[in_office]
exten =>2000,1,NoOp()
same =>n, Swift(This is a test of Cepstral's TTS in Asterisk)
same =>n, Dial(2000)
same =>n, Hangup()

where is the issue.. where am i going wrong??
prashant3s@yahoo.com
 
Posts: 26
Joined: Fri Aug 17, 2018 2:54 pm

Re: Help required for installing & configuring Cepstral TTS

Postby williamconley » Tue Jan 22, 2019 11:55 am

I think we may have found your problem, but I'll check one more time:

williamconley wrote:Let's start here: You said you already performed the steps in the manual. What steps would those be?
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Help required for installing & configuring Cepstral TTS

Postby prashant3s@yahoo.com » Tue Jan 22, 2019 3:07 pm

I have mentioned all the steps above that I have found and have afollowed so far to get this TTS Configured in the server with best of my knowledge and installation guides available with me so far.

I am no clue where am I going wrong or what is left out. Request you to please help me to get this sorted out
prashant3s@yahoo.com
 
Posts: 26
Joined: Fri Aug 17, 2018 2:54 pm

Re: Help required for installing & configuring Cepstral TTS

Postby mflorell » Tue Jan 22, 2019 9:09 pm

These are the instructions we used last time we did the install, and I'm not sure if it was on Asterisk 11 or Asterisk 13.


Here are instructions we have used to install the Cepstral 6.0 version with VICIdial:

1. Go to https://www.cepstral.com/store and purchase a voice license, enough concurrency ports, and the save to a file ability.
2. Go to https://www.cepstral.com/downloads/ and download the appropriate voice files for your Linux install
3. untar the install files
#> tar -xvzf tar -xvzf Cepstral_Allison-*.tar.gz
4. go into the new directory:
#> cd Cepstral_Allison-*
5. run the installer, choose the defaults, and accept their license:
#> bash install.sh
6. Run the swift command with the --reg-voice option to activate your voice and follow the prompts. Be sure to answer the questions exactly how you did when purchasing the key:
#> swift --reg-voice
7. Run the swift command with the --reg-ports option to activate your concurrency ports and follow the prompts. Be sure to answer the questions exactly how you did when purchasing the key:
#> swift --reg-ports
8. Run the swift command with the --reg-filewrite option to activate the ability to save to a file and follow the prompts. Be sure to answer the questions exactly how you did when purchasing the key:
#> swift --reg-filewrite

To test with an outbound survey campaign, make sure your campaign's Routing Extension is set to 8374 or 8375, and the Survey prompt points to a TTS entry on your system. To see debug output on the Asterisk CLI, make sure your server is set to AGI Output = BOTH.
More information, for reference:
https://www.cepstral.com/en/support/tel ... ng-started
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Help required for installing & configuring Cepstral TTS

Postby prashant3s@yahoo.com » Wed Jan 23, 2019 7:28 am

The link provided by you is not working
prashant3s@yahoo.com
 
Posts: 26
Joined: Fri Aug 17, 2018 2:54 pm

Re: Help required for installing & configuring Cepstral TTS

Postby raloheni » Tue Dec 22, 2020 4:26 am

@mflorell

is the app_swift is preinstalled in vicibox asterisk13?

just i need to install cepstral and configure the tts campaign?
raloheni
 
Posts: 138
Joined: Sun Apr 25, 2010 4:23 pm

Re: Help required for installing & configuring Cepstral TTS

Postby striker » Thu Jan 07, 2021 9:41 am

app_swift is not preinstalled in vicibox.
if you want to cepstral integration with vicibox you no need of app_swift.
just install the cepstral voice, concurrent port and save to file license.

if you are using the cepstral with your asterisk dialplan then you might need the app_swift software.

check out my video for cepstral tts with vicidial
https://youtu.be/q6XSDR_YlJ4
www.striker24x7.com www.youtube.com/c/striker24x7 Telegram/skype id : striker24x7
striker
 
Posts: 962
Joined: Sun Jun 06, 2010 10:25 am


Return to Support

Who is online

Users browsing this forum: No registered users and 63 guests