Outbound caller ID issue with fromuser in sip peers

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Outbound caller ID issue with fromuser in sip peers

Postby Jitin » Fri Dec 06, 2019 9:56 am

Hello Sir

Asterisk version : 11.22.0
VERSION: 2.14-694a
BUILD: 181005-1738
OS : centos 6.10
It is a scratch install.

I have issue with caller ID.
the VoIP carrier that I am using is from magnus biling and I need to set "fromuser" in sip peers.
With fromuser, the caller ID goes what is set in fromuser. Is there anyway to bypass the caller ID?
I want to send caller ID which is set in campaign in vici as we are also using ac-cid.
Jitin
 
Posts: 40
Joined: Fri Feb 23, 2018 2:26 am

Re: Outbound caller ID issue with fromuser in sip peers

Postby ambiorixg12 » Fri Dec 06, 2019 6:35 pm

If they set the caller id based on the Remote-Party-I header set sendrpid = yes on your carrier configuration
ambiorixg12
 
Posts: 448
Joined: Tue Sep 17, 2013 10:35 pm

Re: Outbound caller ID issue with fromuser in sip peers

Postby Jitin » Mon Dec 09, 2019 1:48 am

That didn't make any difference. Caller ID id still going from fromuser. Without fromuser , sip account is not working to send calls. SO need an alternative for the same.
Jitin
 
Posts: 40
Joined: Fri Feb 23, 2018 2:26 am

Re: Outbound caller ID issue with fromuser in sip peers

Postby Jitin » Mon Dec 09, 2019 6:24 am

This was resolved

had to add trustpid at carrier server.
and sendrpid=pai at dialer end in carrier settings.

thanxs for the support.
Jitin
 
Posts: 40
Joined: Fri Feb 23, 2018 2:26 am

Re: Outbound caller ID issue with fromuser in sip peers

Postby williamconley » Thu Mar 05, 2020 5:59 pm

Excellent postback. 8-)
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Outbound caller ID issue with fromuser in sip peers

Postby carrmic » Thu Nov 18, 2021 8:58 am

I found this trouble too when my SIP trunk with Twilio needed “fromuser” set. The answer was to put “sendrpid=pai” in the Trunk Peer Details. I encountered it again when I set up a new PJSIP Trunk. For this type there are switches in the advanced settings for the trunk. I needed to set “Trust RPID/PAI” to “Yes” and also set “Send RPID/PAI” to “Send P-Asserted-Identity header”. I was then able to pass the caller ID from the extension’s setting. CID set at Trunk or Outbound Route will also pass through.
I’ll add that I’m not sure why I didn’t need “trustrpid=yes” in the Peer Details for the standard SIP trunk, but did need to set that switch in the PJSIP trunk.
carrmic
 
Posts: 1
Joined: Wed Nov 17, 2021 12:27 pm


Return to Support

Who is online

Users browsing this forum: No registered users and 104 guests