Hi
top - 21:56:04 up 2:11, 1 user, load average: 0.88, 0.79, 0.36
Tasks: 97 total, 1 running, 96 sleeping, 0 stopped, 0 zombie
Cpu(s): 24.4% us, 5.0% sy, 0.0% ni, 67.6% id, 0.2% wa, 2.0% hi, 0.9% si
Mem: 1032964k total, 338756k used, 694208k free, 35320k buffers
Swap: 2031608k total, 0k used, 2031608k free, 178724k cached
iam observing the load on my SERVER, for 5agents the process going to 24.4%
my config
Xeon 2.4Ghz
2GB RAM
TDM800
ASterisk 1.2.17
zaptel 1.2.16
G.729 at server side
G.729 at Client side.
SIP Provider
voice going choppy with meetme,
when the call happend manually with X-lite, even 15 people
dont see the load and call quality is good.
any suggestions
Ram
High load even 5 agents
Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N
9 posts
• Page 1 of 1
High load even 5 agents
by ramindia » Mon Jun 04, 2007 11:32 am
Kindly post your feedback, if this solution works.
so its very usefull for others who join later as a NEWBIE.
so its very usefull for others who join later as a NEWBIE.
- ramindia
- Posts: 688
- Joined: Wed Oct 11, 2006 4:06 am
- Location: India
by ramindia » Mon Jun 04, 2007 5:37 pm
Hi
no iam not recording anything
its simple calls, no recordings set in campaign
ram
no iam not recording anything
its simple calls, no recordings set in campaign
ram
Kindly post your feedback, if this solution works.
so its very usefull for others who join later as a NEWBIE.
so its very usefull for others who join later as a NEWBIE.
- ramindia
- Posts: 688
- Joined: Wed Oct 11, 2006 4:06 am
- Location: India
by gardo » Tue Jun 05, 2007 5:12 am
thats weird. unless you have full recordings and using g729 codecs will your load be that high. have you checked the output of top? Check w/c processess are eating your resources. Also the cron jobs being run by the system.
http://goautodial.com
Empowering the next generation contact centers
Empowering the next generation contact centers
- gardo
- Posts: 1926
- Joined: Fri Sep 15, 2006 10:24 am
- Location: Manila, 1004
by ramindia » Tue Jun 05, 2007 8:42 am
Hi
the high process taking is asterisk only
any suggestions to optimise the setup
and add more add agents.
ram
the high process taking is asterisk only
any suggestions to optimise the setup
and add more add agents.
ram
Kindly post your feedback, if this solution works.
so its very usefull for others who join later as a NEWBIE.
so its very usefull for others who join later as a NEWBIE.
- ramindia
- Posts: 688
- Joined: Wed Oct 11, 2006 4:06 am
- Location: India
high load with g729?
by avalentin » Wed Jun 06, 2007 2:57 pm
Hi ram!
You should try to set your agents to alaw or ulaw. If the load is the half with that setting, the meetme app is going to transcode the voicestream. I looked in the sourcecode of app_meetme, and the ourput there seems to be written in slinear. (but i'm not vergy good in c). Also you should give app_conference a try, perhaps that's making a better job.
Have luck,
Andr´e
You should try to set your agents to alaw or ulaw. If the load is the half with that setting, the meetme app is going to transcode the voicestream. I looked in the sourcecode of app_meetme, and the ourput there seems to be written in slinear. (but i'm not vergy good in c). Also you should give app_conference a try, perhaps that's making a better job.
Have luck,
Andr´e
- avalentin
- Posts: 8
- Joined: Mon May 28, 2007 8:13 am
by ramindia » Thu Jun 07, 2007 12:24 am
Hi
I have SIP account with 100 Channels
Manual dial
Just move back from 1.2.18 to 1.2.17.1 ASterisk
and 1.2.16zaptel, should be ok now with 12 agents
but load is still the same. no change.
still iam under observation the testing
ram
I have SIP account with 100 Channels
Manual dial
Just move back from 1.2.18 to 1.2.17.1 ASterisk
and 1.2.16zaptel, should be ok now with 12 agents
but load is still the same. no change.
still iam under observation the testing
ram
Kindly post your feedback, if this solution works.
so its very usefull for others who join later as a NEWBIE.
so its very usefull for others who join later as a NEWBIE.
- ramindia
- Posts: 688
- Joined: Wed Oct 11, 2006 4:06 am
- Location: India
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: Bing [Bot], Google [Bot] and 301 guests