Istalling additional tel server into old cluster WARNING!

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Istalling additional tel server into old cluster WARNING!

Postby xtdirect » Thu Dec 09, 2021 6:21 pm

Vicibox express 7
VERSION: 2.14-667a
BUILD: 180331-1715

Background:
Need to install an additional telephony server into an existing old cluster.
The cluster consists of a database, web and three telephony servers.
I have 4 new servers staged with Phase 1 installation complete using the same vicibox 7 iso as the cluster.
The new servers will be telephony servers in the cluster.
When I run "vicibox-install" I get the warning below:

****************************
Do you want to continue with the ViciBox install? [y/N] : y

Do you want to enable expert installation? [y/N] : n

The Internal IP address found was 10.0.1.104.
Do you want to use this IP address for ViciDial? [Y/n] : y

Will this server be used as the Database? [y/N] : n

Please input the master database IP address (10.0.1.104) : 10.0.1.70
Do you want to connect using the default ViciDial DB settings? [Y/n] : y
Database entry does not match settings supplied! Enabling legacy mode!
Please verify all data before continuing! Installing on a cluster that
is already set-up can cause irreparable damage! You have been warned.
***************************************************

When I run mysql -h 10.0.1.70 -u cron -p1234 asterisk -e "select * from vicidial_users";
The new server is able to log in and read the database.

Running the following:
# cd /usr/src/astguiclient/trunk/
# svn info

Shows the same svn version E155007 on both the database and the to be installed telephony server.

Question
Why am I receiving the Legacy warning?
What could the ramifications be for the existing cluster if it fails?
Any steps to resolve this?

Thanks in advance for your input.

- Brian
hwdevelopment.com
xtdirect
 
Posts: 23
Joined: Wed Jul 25, 2012 1:02 pm

Re: Istalling additional tel server into old cluster WARNING

Postby callcentertech » Mon Dec 13, 2021 2:46 pm

if I were you, I will reinstall primary db server again with default db settings and then add other servers. I think the warning says that you have used non-default database settings on the primary DB and if you remember that, you should match those setting on every server you need to add to cluster..
Email: kaushal@callcentertech.net, Phone/WhatsApp: +1 (636)-556-0022
Web: https://www.callcentertech.net, Skype: live:52956f35f3283f55
Fully Automated VICIdial Installer https://www.callcentertech.net/vicifast/
callcentertech
 
Posts: 48
Joined: Sat Jul 17, 2021 2:01 pm
Location: Ahmedabad, India

Re: Istalling additional tel server into old cluster WARNING

Postby xtdirect » Wed Dec 15, 2021 10:07 pm

Thanks for the response.
The db has 10 years worth of logs. so it would be no easy task... and I am not sure how to re-adopt the web and existing telephony servers.... (re-run vicibox-install)??
My gut tells me this is a false error as the potential new box is able to login to the DB with the default credentials.

I'm just not clear on what would happen if I proceed with the install.

If the new telephony server would just not be adopted, I could live with that. But if it messes up the existing cluster... that would be an issue.
hwdevelopment.com
xtdirect
 
Posts: 23
Joined: Wed Jul 25, 2012 1:02 pm

Re: Istalling additional tel server into old cluster WARNING

Postby GenXOutsourcing » Mon Dec 20, 2021 6:43 pm

I would dump the logs and only keep what you need.

Then dump the database and load into a fresh machine to see if any issue. If all is good, i would recommend to upgrade to V9 and Opensuse15.2

Just my 2cents
Built too many to count, Centos7 Scratch install, Opensuse Scratch install, Centos8 Scratch install, etc.
Dual 8 core/32gb RAM/500gb SSDs
SVN Version:3440
VERSION: 2.14-812a
genxoutsourcing.com
GenXOutsourcing
 
Posts: 120
Joined: Sun Sep 22, 2019 12:53 am


Return to Support

Who is online

Users browsing this forum: Google [Bot] and 81 guests