How to transfer calls to closer that is another agent

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

How to transfer calls to closer that is another agent

Postby indrajeetbanerjee » Tue Jul 05, 2022 11:06 pm

I am using vicibox 7. I want to transfer calls to closer which is another phone extension 1001. Now it is outbound Ratio method is dialing. When opener transfer calls to Dial with customer to phone number 1001, it is auto hung up. I think there is sone settings which needs to be enabled for this purpose which i don't know. So can please share which setting should i enable for this?
indrajeetbanerjee
 
Posts: 2
Joined: Sun Jun 12, 2022 1:01 pm

Re: How to transfer calls to closer that is another agent

Postby carpenox » Wed Jul 06, 2022 6:54 am

use the agent direct ingroup
Alma Linux 9.3 | Version: 2.14-911a | SVN Version: 3815 | DB Schema Version: 1710 | Asterisk 18.18.1
www.dialer.one -:- 1-833-DIALER-1 -:- https://linktr.ee/CyburDial -:- WhatsApp: +19549477572 -:- Skype: live:carpenox_3
carpenox
 
Posts: 2230
Joined: Wed Apr 08, 2020 2:02 am
Location: Coral Springs, FL

Re: How to transfer calls to closer that is another agent

Postby striker » Fri Jul 08, 2022 5:28 am

@indrajeetbanerjee
Do you to transfer to another Agent (who logged in to the vicidial agent panel) or
transfer to an extension/phone (eg 1000 - registered in a softphone or hardphone)
www.striker24x7.com www.youtube.com/c/striker24x7 Telegram/skype id : striker24x7
striker
 
Posts: 962
Joined: Sun Jun 06, 2010 10:25 am

Re: How to transfer calls to closer that is another agent

Postby williamconley » Mon Jul 11, 2022 1:22 pm

indrajeetbanerjee wrote:I am using vicibox 7. I want to transfer calls to closer which is another phone extension 1001. Now it is outbound Ratio method is dialing. When opener transfer calls to Dial with customer to phone number 1001, it is auto hung up. I think there is sone settings which needs to be enabled for this purpose which i don't know. So can please share which setting should i enable for this?


1) Welcome to the Party! 8-)

2) As you are obviously new here, I have some suggestions to help us all help you:

When you post, please post your entire configuration including (but not limited to) your installation method (7.X.X?) and vicidial version with build (VERSION: 2.X-XXXx ... BUILD: #####-####).

This IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)

You should also post: Asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box. If your installation method is "manual/from scratch" you must post your operating system with version (and the .iso version from which you installed your original operating system) plus a link to the installation instructions you used. If your installation is "Hosted" list the site name of the host.

If this is a "Cloud" or "Virtual" server, please note the technology involved along with the version of that techology (ie: VMware Server Version 2.0.2). If it is not, merely stating the Motherboard model # and CPU would be helpful.

Similar to This:

Vicibox X.X from .iso | Vicidial X.X.X-XXX Build XXXXXX-XXXX | Asterisk X.X.X | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel DG35EC | Core2Quad Q6600

3) For the record: The Vicidial Manager's Manual covers transfers to closers quite well. Duplicating that coverage here would be a bit redundant. Seriously: It's free on EFLO.net. There's a paid version with a lot more information in it, but this particular topic is in the free version.

4) When you say "transfer calls to closer which is another phone extension 1001" and "transfer calls to Dial with customer to phone number 1001", you are describing a technical situation with non-technical terms. I strongly suspect that if you were to describe, in detail, each button you press and provide configuration options relevant to the situation we could find your problem.

5) Is the receiving agent (aka: closer) logged in to the InGroup that the sending agent (aka: fronter) is sending the call to? Can you PROVE that they are logged in? FYI: The Real Time Screen has a + next to each user logged in, pressing this will provide a list of Ingroups to which that user is logged in. If the ingroup in quesiton isn't highlighted, they are NOT able to get calls for that ingroup.

6) Asterisk CLI during the transfer may be quite useful. Not 3000 lines of other call information, just a single test starting just before the transfer and ending after the "auto-hangup".

Happy Hunting! 8-)
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)


Return to Support

Who is online

Users browsing this forum: No registered users and 70 guests