Assigning Ports in Gateway

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Assigning Ports in Gateway

Postby galajits@gmail.com » Fri Aug 05, 2022 2:09 am

Hello

We are using Vicibox 9 flawlessly. We recently got Synway GSM 32 port Gateway. I want to configure Dialer in a way where every caller will be assigned a specific port and calls will get routed through that port only. What changes / addition do I need to do in extensions.conf/sip.conf.

Please help
galajits@gmail.com
 
Posts: 54
Joined: Thu Feb 15, 2018 6:34 am

Re: Assigning Ports in Gateway

Postby galajits@gmail.com » Sat Aug 06, 2022 4:50 am

Please help
galajits@gmail.com
 
Posts: 54
Joined: Thu Feb 15, 2018 6:34 am

Re: Assigning Ports in Gateway

Postby striker » Mon Aug 08, 2022 10:02 am

you need to create port group and SIP Endpoint group

reference to configure synway.
https://www.striker24x7.com/2016/03/how ... teway.html

Reach me on skype striker24x7 for support
or telegram https://t.me/striker24x7
www.striker24x7.com www.youtube.com/c/striker24x7 Telegram/skype id : striker24x7
striker
 
Posts: 962
Joined: Sun Jun 06, 2010 10:25 am

Re: Assigning Ports in Gateway

Postby galajits@gmail.com » Mon Aug 08, 2022 10:50 am

Thanks for the repsonse Striker, With this configuration, If I have 10 callers making manual dial at the same time, which port will be assigned to which caller. Where do I define that in GSM gateway and in vicibox.

like - lets say I have caller A, B and C, I want whenever caller A will dial any number from vicidial, it will get routed through port 1 of GSM, similairly, for Caller B, all the calls will go through port 2 and Caller C's call will go through port 3 and so on. I want to assign specific ports to specific callers.

I have configured GSM gateway sucessfully in a way that calls gets routed dynamically from any port which is free. but I want it to get configured for a caller wise port wise.

Thanks for your response once again in advance.
galajits@gmail.com
 
Posts: 54
Joined: Thu Feb 15, 2018 6:34 am

Re: Assigning Ports in Gateway

Postby striker » Tue Aug 09, 2022 1:13 am

are they dialling manuall from softphone/hardphone or login as agent and dialing manual from agent screen?


if you check my article, step 2, create a port group ,here you need to create port group per index
index 1 - port 1 , sip use gsm1001
index 2- port 2, sip user gsm 1002 ......

then in vicidial you need to have gsm1001, gsm1002 sip peer.
if they aredialing manualy from softphone, then you can change there phone conext whcih has its own dialplan ..
[cotext1]
exten => _9X.,1,Dial(gsm1001/${EXTEN})
[context2]
exten => _9x.,1,Dial(gsm1002/${EXTEN})
www.striker24x7.com www.youtube.com/c/striker24x7 Telegram/skype id : striker24x7
striker
 
Posts: 962
Joined: Sun Jun 06, 2010 10:25 am

Re: Assigning Ports in Gateway

Postby galajits@gmail.com » Mon Aug 22, 2022 11:47 am

Thanks Striker. This helped me get going.. Your are the master.
galajits@gmail.com
 
Posts: 54
Joined: Thu Feb 15, 2018 6:34 am

Re: Assigning Ports in Gateway

Postby galajits@gmail.com » Mon Dec 19, 2022 7:22 am

Hello

I have configured 1001 with the same manner you told me to do, however, for some reason, whenever I dial any mobile number, it dial 1001 and my zoipper rings instead of call going to Synway gateway under port 22

Below are the settings I did

My Sip.conf

[1001]
username=1001
secret=tesing
accountcode=1001
dtmfmode=rfc2833
qualify=yes
nat=force_rport,comedia
type=friend
host=dynamic
insecure=port,invite

extentions.conf
[default]
include => vicidial-auto

exten => _9X.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9X.,n,Dial(SIP/1001/+91${EXTEN:1},,tToR)
exten => _9X.,n,Hangup()


Below are the images of Synway gsm config which you mentioned in step 2 of your article
https://ibb.co/t3dM2Yx
galajits@gmail.com
 
Posts: 54
Joined: Thu Feb 15, 2018 6:34 am

Re: Assigning Ports in Gateway

Postby striker » Tue Dec 20, 2022 12:05 am

you need to create a sip account that is unique to gsm registration
as said in my blog gsm222.

1001 you already registered in zoiper. dont use that to register in gsm gateway..
www.striker24x7.com www.youtube.com/c/striker24x7 Telegram/skype id : striker24x7
striker
 
Posts: 962
Joined: Sun Jun 06, 2010 10:25 am

Re: Assigning Ports in Gateway

Postby galajits@gmail.com » Tue Dec 20, 2022 1:56 am

Yes I did the same, I have registered GSM gateway with userid - 2612 and created the same sip account in sip.confs instead of gsm222.

After doing some research and changes, now, I am able to pass the call to GSM gateway, but all the calls are getting routed to same port.

I registered phone extension in zoipper as 1001 and when dialed by mobile number, call went through port 24 of gsm gateway, but when i registered another phone - 9001 in zoipper and dialed my phone number, instead of port 23, call went from port 24.

how do I tell gsm gateway that when call comes from sip account 9001, route the call to port 23 and not 24
galajits@gmail.com
 
Posts: 54
Joined: Thu Feb 15, 2018 6:34 am

Re: Assigning Ports in Gateway

Postby galajits@gmail.com » Wed Feb 22, 2023 1:48 am

Thanks a ton to striker for helping me get outbound calls working.... Now I am stuck for incoming calls... phew.. I made the required changes / configuration in gateway and created ingroup and DID in dialer.

What is happening is - when caller dial the number from outside to reach the agent, it first asks caller to dial the extension number. Once extension is entered, incoming call lands on to agent's Zoipper and it rings instead of call landing on Agent's screen.

Please help me know where I am going wrong..

Below is the configuration i made in Gateway

Under Tel->IP, I entered
source port group of agent
CallerID Prefix: *
CalleeID Prefix: phone extension of Agent
Destination IP: IP of Vicibox dialer.

Same config is done under IP->Tel/IP CalleeID Number Manipulation Rule

Please help as there are around 150 odd calls getting abandoned because of calls not able to land to Agent's screen.

Applogise if I missed anything to mention.
galajits@gmail.com
 
Posts: 54
Joined: Thu Feb 15, 2018 6:34 am

Re: Assigning Ports in Gateway

Postby galajits@gmail.com » Wed Feb 22, 2023 8:03 am

Please help
galajits@gmail.com
 
Posts: 54
Joined: Thu Feb 15, 2018 6:34 am

Re: Assigning Ports in Gateway

Postby galajits@gmail.com » Mon Feb 27, 2023 6:57 am

Is there no one who can help me on this?
galajits@gmail.com
 
Posts: 54
Joined: Thu Feb 15, 2018 6:34 am


Return to Support

Who is online

Users browsing this forum: No registered users and 68 guests