Inbound configure how to

Discussions about new features or changes in existing features

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Inbound configure how to

Postby 14sudharsan » Tue May 07, 2013 12:38 am

Hi Team
vicidial inbound configure how to specific sip account. Below i have mentioned configurations

We are using cloud setup

192.168.1.10 Vicidial running , 192.168.1.5 , 192.168.1.8 Asterisk dialing servers
unable to find iso version ? |openSUSE 11.1 (x86_64) | Vicidial VERSION: 2.2.1-237 BUILD: 100510-2015 | Asterisk 1.4.21.2-vici | Sangoma Hardware | No Extra Software After Installation | Intel(R) Xeon(R) CPU E5506 @ 2.13GHz | 8 core processor
14sudharsan
 
Posts: 44
Joined: Fri Oct 01, 2010 10:45 am

Re: Inbound configure how to

Postby omarrodriguezt » Tue May 07, 2013 8:09 am

Cloud setup is not recommended for Vicidial.
http://www.ITContinental.com
Dedicated USA Servers - Vicibox - Vicidial - Limesurvey - Vtiger CRM - More than 15 years experience - Hablamos Español
omarrodriguezt
 
Posts: 667
Joined: Fri Jun 05, 2009 12:22 pm
Location: Dominican Republic

Re: Inbound configure how to

Postby 14sudharsan » Tue May 07, 2013 10:36 pm

Sorry ,
we are using cluster by mistake i mentioned cloud
unable to find iso version ? |openSUSE 11.1 (x86_64) | Vicidial VERSION: 2.2.1-237 BUILD: 100510-2015 | Asterisk 1.4.21.2-vici | Sangoma Hardware | No Extra Software After Installation | Intel(R) Xeon(R) CPU E5506 @ 2.13GHz | 8 core processor
14sudharsan
 
Posts: 44
Joined: Fri Oct 01, 2010 10:45 am

Re: Inbound configure how to

Postby DomeDan » Wed May 08, 2013 4:01 am

14sudharsan wrote:vicidial inbound configure how to specific sip account.

Hi!

I don't understand the question (if it is a question?)

Something inbound... You can start by reading the manual there is some inbound stuff in there :roll:
Vicidial Partner. Region: Sweden/Norway.
Does Vicidial installation, configuration, customization, add-ons, CRM implementation, support, upgrading, network-related, pentesting etc. Remote and onsite assistance.
Email: domedan (at) gmail.com
DomeDan
 
Posts: 1226
Joined: Tue Jan 04, 2011 9:17 am
Location: Sweden

Re: Inbound configure how to

Postby adam.greenhalgh1 » Wed May 08, 2013 5:07 am

On your IP phone or the receiver(handset) Configure it directly via the settings on the firmware.

With ours we need to locate the IP of the hard phone.
and configure it via the software.

If your question is How do i configure a sip account?

In which case RTFM or first add the phone account on the dialer and then add the user account.

Is that of ANY use to you at all?

Adam.
GoAutoDial CE 2.1
VERSION: 2.4-309a
BUILD: 110430-1642
Processors 2
Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz
adam.greenhalgh1
 
Posts: 71
Joined: Thu Feb 28, 2013 11:52 am

Re: Inbound configure how to

Postby 14sudharsan » Fri May 10, 2013 4:08 am

I have configured inbound call setup in vicidial 192.168.1.10

INBOUND CALL LANDING SERVER 192.168.1.14
Pri number = 66616300

I have followed vicidial manual steps

I have created

Campaign = inboundcalls

DID = 66616300

INGROUP = inboundcalls



-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
-- Extension '66616300' in context 'default' from '01409190474' does not exist. Rejecting call on channel 0/1, span 2
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing [8600062@default:1] MeetMe("Local/8600062@default-4e5f,2", "8600062|F") in new stack
-- Executing [913222233307@default:1] AGI("Local/8600062@default-4e5f,1", "agi://127.0.0.1:4577/call_log") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
-- Executing [913222233307@default:2] Dial("Local/8600062@default-4e5f,1", "Zap/g0/03222233307||To") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called g0/03222233307
-- Zap/15-1 is proceeding passing it to Local/8600062@default-4e5f,1
-- Zap/15-1 is making progress passing it to Local/8600062@default-4e5f,1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing [58600062@default:1] MeetMe("Local/58600062@default-67a7,2", "8600062|Fmq") in new stack
-- Executing [8309@default:1] Answer("Local/58600062@default-67a7,1", "") in new stack
-- Executing [8309@default:2] Monitor("Local/58600062@default-67a7,1", "wav|20130509-161455_3222233307_karthiga_DB489T3") in new stack


Note: I Have Dialed from 1409190474 pri to 66616300
But calls are not landing can u pls guide where i m stuck

My requirement need to land incoming call on inbound que
unable to find iso version ? |openSUSE 11.1 (x86_64) | Vicidial VERSION: 2.2.1-237 BUILD: 100510-2015 | Asterisk 1.4.21.2-vici | Sangoma Hardware | No Extra Software After Installation | Intel(R) Xeon(R) CPU E5506 @ 2.13GHz | 8 core processor
14sudharsan
 
Posts: 44
Joined: Fri Oct 01, 2010 10:45 am

Re: Inbound configure how to

Postby omarrodriguezt » Fri May 10, 2013 8:17 am

http://www.ITContinental.com
Dedicated USA Servers - Vicibox - Vicidial - Limesurvey - Vtiger CRM - More than 15 years experience - Hablamos Español
omarrodriguezt
 
Posts: 667
Joined: Fri Jun 05, 2009 12:22 pm
Location: Dominican Republic


Return to Features

Who is online

Users browsing this forum: No registered users and 20 guests