Page 1 of 1

Goautodial Configuration

PostPosted: Mon Apr 30, 2012 8:22 am
by firstnationalsales
Hi,

We tried installing this ourselves and are a little lost on how to configure our SIP provider. We have a fresh install, just need a little direction on the last steps. Looking for someone straight away please send rates and availability.

thanks,

Re: Goautodial Configuration

PostPosted: Mon Apr 30, 2012 8:26 am
by williamconley
We charge $25 to install a standard sip provider (such as Vitelity or VOIPStreet) in a non-rush situation.

Otherwise, you'll find MANY posts with precise instructions on adding a sip carrier in a Vicidial system. :)

Re: Goautodial Configuration

PostPosted: Mon Apr 30, 2012 8:41 am
by firstnationalsales
williamconley wrote:We charge $25 to install a standard sip provider (such as Vitelity or VOIPStreet) in a non-rush situation.

Otherwise, you'll find MANY posts with precise instructions on adding a sip carrier in a Vicidial system. :)


Can you please send me your email?

Re: Goautodial Configuration

PostPosted: Mon Apr 30, 2012 9:35 am
by williamconley
Our site is in my signature (www.poundteam.com) and our contact information is available on the site (as is our Catalog ... also available at Catalog.poundteam.com ... which shows our pricing and service levels!) :)

Re: Goautodial Configuration

PostPosted: Tue May 01, 2012 7:00 am
by boybawang
Nice doing business with you Mike, till next time

Expansion for our current setup

PostPosted: Thu May 24, 2012 6:50 am
by vjonvicidial
Current Setup
30 channel PRI - Switchvox SMB (latest update) on HP server with Digium PRI card - Goautodial CE 2.0 (Vicidial VERSION: 2.4-308a BUILD: 110428-1108) on a assembled machine
Current Utilisation
6 soft phone users using vcidal as auto dialer to dial out leads. - 2 ip phone users - 5 VoIP-FXS ATA- with regular Phone users

Requirement - 10 new simple phone users.
Instead of deploying more ATAs we wish to deploy a a single system for easy of management and flexibility of expanding lines beyond current req also.
The soft phone users + ip phones useres are the only one require vicidial for autodialing and switchboard of switchvox (as integrated with salesforce(dot)com)
Rest the old 5+ new 10 users will use it as simple PBX with regular pbx functionality.


Hence can we have a conventional EPABX system for these regular phones and share our same PRI with both systems. This system would become robust and expandable with low/onetime cost. Both system should be able to communicate and use simple features like call transfer between each other.

Also i am just curious can we bypass switchvox all together and and just rely on conventional EPABX and Goautodial (for soft phone and auto dialing). only concern being integration with salesforce(dot)com. our requirement is that when a call connects to agent the dialed customer details in salesforce(dot)com should apear on his screen. it should not take more than one click.

I am open for all options suggestions. kindly guide.

Re: Goautodial Configuration

PostPosted: Fri Jun 01, 2012 1:57 am
by krishnakeshwar
Hi ,

is your problem resolve or not if not plz add me at skype gamil and yahoo, i will guide you how to configure vicidial step by step...

ID : Krishnakeshwar

Re: Goautodial Configuration

PostPosted: Sat Jan 10, 2015 11:37 am
by vjonvicidial
No we had settled for switchvox with vicidial