Asterisk 1.8 directory and compilation

General and Support topics relating to ViciDialNow and GoAutoDial ISO installers

Moderators: enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, s0lid

Asterisk 1.8 directory and compilation

Postby oshonubi » Thu Oct 09, 2014 11:46 am

Hello All,

Kindly help with the directory in which asterisk 1.8 is installed in goautodial 3.3. I need to recompile asterisk but cannot locate it in the legacy directory /usr/src/.

Thank you.
Vicidial Scratch Install
Rocky Linux 9.2
PHP 8.0
Asterisk 16.17.0-vici
Dahdi 3.2
oshonubi
 
Posts: 169
Joined: Mon Jun 15, 2009 8:36 am
Location: Lagos, Nigeria

Re: Asterisk 1.8 directory and compilation

Postby gardo » Mon Oct 13, 2014 2:50 pm

You need to download and install the Asterisk SRPM (source RPM) file. You can get it here: http://downloads2.goautodial.org/centos/5/updates/SRPMS/.
http://goautodial.com
Empowering the next generation contact centers
gardo
 
Posts: 1926
Joined: Fri Sep 15, 2006 10:24 am
Location: Manila, 1004

Re: Asterisk 1.8 directory and compilation

Postby oshonubi » Mon Oct 13, 2014 4:07 pm

Hi Gardo,

Thanks for the response. Will go through and get back to you.
Vicidial Scratch Install
Rocky Linux 9.2
PHP 8.0
Asterisk 16.17.0-vici
Dahdi 3.2
oshonubi
 
Posts: 169
Joined: Mon Jun 15, 2009 8:36 am
Location: Lagos, Nigeria

Re: Asterisk 1.8 directory and compilation

Postby oshonubi » Mon Oct 13, 2014 4:32 pm

Hello Gardo,

I downloaded the source rpm and run the command rpm -Uvh asterisk-1.8.23.0-1_centos5.go.src.rpm. It did not install the source rpm, is there any other instruction for the installation.
Vicidial Scratch Install
Rocky Linux 9.2
PHP 8.0
Asterisk 16.17.0-vici
Dahdi 3.2
oshonubi
 
Posts: 169
Joined: Mon Jun 15, 2009 8:36 am
Location: Lagos, Nigeria

Re: Asterisk 1.8 directory and compilation

Postby Anabia123 » Tue Oct 28, 2014 5:17 am

Hi Gardo,

Thanks in advance for your reply. That was an excellent solution.

I did it as follows:

Line 14018 before:
14018 <!-- RECORD ID: --><font class="body_small" style="display:none;"><span id="RecorDID" style="display:none;"></span></font><br />

Now:
14018 RECORD ID: <font class="body_small" style="display:always:"><span id="RecorDID" style="display:always;"></span></font><br />

Best regards.
ali
Anabia123
 
Posts: 1
Joined: Tue Oct 28, 2014 4:57 am

Re: Asterisk 1.8 directory and compilation

Postby gardo » Sat Nov 01, 2014 9:07 pm

Try googling on how to install SRPM files. Normally if you run "rpm -Uvh file.srpm", it will install the tar.gz (source file) file in "/usr/src/redhat/SOURCES" directory.

oshonubi wrote:Hello Gardo,

I downloaded the source rpm and run the command rpm -Uvh asterisk-1.8.23.0-1_centos5.go.src.rpm. It did not install the source rpm, is there any other instruction for the installation.
http://goautodial.com
Empowering the next generation contact centers
gardo
 
Posts: 1926
Joined: Fri Sep 15, 2006 10:24 am
Location: Manila, 1004


Return to ViciDialNow - GoAutoDial

Who is online

Users browsing this forum: Google [Bot] and 55 guests

cron