extensions.conf

General and Support topics relating to ViciDialNow and GoAutoDial ISO installers

Moderators: enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, s0lid

extensions.conf

Postby callcenter » Sun Jan 06, 2008 8:10 am

Hi

I installed Vicidialnow and using degium X100P card as timer. Using eyebeam as softdialers.
Can any one help me out with the changes in extensions.conf and sip.conf to be made.
Thanx
callcenter
 
Posts: 2
Joined: Sun Jan 06, 2008 8:03 am

Postby ramindia » Thu Jan 10, 2008 9:53 pm

Hi

what kind of changes you are looking ?

ram
Kindly post your feedback, if this solution works.
so its very usefull for others who join later as a NEWBIE.
ramindia
 
Posts: 688
Joined: Wed Oct 11, 2006 4:06 am
Location: India

Postby callcenter » Fri Jan 11, 2008 9:12 am

I only make sip calls via callcentric and other few providers.
I updated sip.conf with the user id ,passwords and the ip address. But the extension.conf file is written for trunx or iax lines.

So can any one post the extension.conf designed only for sip protocol.
callcenter
 
Posts: 2
Joined: Sun Jan 06, 2008 8:03 am

Postby Op3r » Fri Jan 11, 2008 10:44 am

you dont know how to edit asterisk confs?

So here goes, there's a bunch of example on the extensions.conf please read it.
Get paid for US outbound Toll Free calls. PM me.
Op3r
 
Posts: 1424
Joined: Wed Jun 07, 2006 7:53 pm
Location: Manila

Postby ramindia » Fri Jan 11, 2008 10:45 am

Hi

this is from scrach_install

3. edit sip.conf
- vi /etc/asterisk/sip.conf
here is where we will edit the configuration of our SIP compatible
phone devices. As stated at the beginning, we will be setting up a
Grandstream Budgetone 102 phone and a Sipura SPA-2000 adapter with
two analog phones connected(each with it's own extension). Here are
the settings we used to set each of them up:
[general]
port = 5060
bindaddr = 0.0.0.0
context = default
; register SIP account on remote machine if using SIP trunks
; register => testSIPtrunk:test@10.10.10.16:5060
;
; setup account for SIP trunking:
; [SIPtrunk]
; disallow=all
; allow=ulaw
; allow=alaw
; type=friend
; username=testSIPtrunk
; secret=test
; host=10.10.10.16
; dtmfmode=inband
; qualify=1000



ram
Kindly post your feedback, if this solution works.
so its very usefull for others who join later as a NEWBIE.
ramindia
 
Posts: 688
Joined: Wed Oct 11, 2006 4:06 am
Location: India


Return to ViciDialNow - GoAutoDial

Who is online

Users browsing this forum: No registered users and 35 guests