No Answer AutoDial - how to

General and Support topics relating to ViciDialNow and GoAutoDial ISO installers

Moderators: enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, s0lid

No Answer AutoDial - how to

Postby AndreO » Mon Aug 04, 2008 10:54 am

Dear all,
we installed the dialer and it works great. However when I went through the reports I realized that almost in 90-95% of the cases the call status is: No Answer AutoDial. I tried to dial manualy and was able to get hold of the customers in many cases or I got the voice mail. Would you please explain to me the meaning of this status as well as how to make sure I get hold of everysingle customer.

thanks in advance, Andre
AndreO
 
Posts: 10
Joined: Mon Aug 04, 2008 10:44 am

Postby mflorell » Mon Aug 04, 2008 1:35 pm

NA (or No Answer Auto-Dial) status means that the call did not receive an Answer signal from the carrier for that call before the dial timeout was reached.

This can be for all sorts of reasons from network congestion to ring-no-answers or many other call termination reasons.

The only way to guarantee that you contact ever number is to dial manually.
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

No Answer AutoDial - how to

Postby AndreO » Mon Aug 04, 2008 1:46 pm

Thank you for quick response. One more question: Is there any way to set up the system to wait a few extra seconds or recognize this kind of delay?
Once again,
Thank you in advance for the help.
Andre
AndreO
 
Posts: 10
Joined: Mon Aug 04, 2008 10:44 am

Postby mflorell » Mon Aug 04, 2008 3:29 pm

What is your dial timeout currently set to?
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Postby AndreO » Mon Aug 04, 2008 7:56 pm

its set to 5 sec
AndreO
 
Posts: 10
Joined: Mon Aug 04, 2008 10:44 am

Postby mflorell » Mon Aug 04, 2008 8:13 pm

Whoa! that is WAY too low. it should not really be below 15.
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Postby AndreO » Tue Aug 05, 2008 5:46 pm

thank you. let me try that
AndreO
 
Posts: 10
Joined: Mon Aug 04, 2008 10:44 am

Postby AndreO » Tue Aug 12, 2008 4:50 pm

Well, :( its seems like I can not find the place where i can change these settings. Would you please walk me through. Please

Thank you in advance
AndreO
 
Posts: 10
Joined: Mon Aug 04, 2008 10:44 am

Postby mflorell » Tue Aug 12, 2008 6:50 pm

It's in the campaign detail screen, Dial Timeout
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Postby AndreO » Mon Sep 15, 2008 7:40 pm

Well.....I guess I'm doing something wrong in here, because even after I changed the settings its still doing the same.. Any Ideas....? anybody..? maybe somebody would be interested in helping me to go through this?? thanks in advance
AndreO
 
Posts: 10
Joined: Mon Aug 04, 2008 10:44 am

Postby mflorell » Tue Sep 16, 2008 2:46 am

Are you sure you are changing the dial timeout and not the drop seconds? Because the drop seconds defaults to 5 seconds as you have mentioned.
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Postby Op3r » Tue Sep 16, 2008 3:12 pm

Have you tried reading the manager's manual?

The manager's manual can be purchased at www.eflo.net . It will help you understand the features of VICIDIAL and help you manage it. Plus if you purchase the Manager's Manual you help the development of VICIDIAL itself.
Get paid for US outbound Toll Free calls. PM me.
Op3r
 
Posts: 1424
Joined: Wed Jun 07, 2006 7:53 pm
Location: Manila

Postby AndreO » Tue Sep 16, 2008 10:02 pm

yes sir...i am sure...unless i'm doing something really wrong. its on Campaign page right below Local Call Time box..Am I at the right place???
AndreO
 
Posts: 10
Joined: Mon Aug 04, 2008 10:44 am

Postby AndreO » Thu Sep 18, 2008 1:17 pm

ok here is what i see in stats: Does anybody can help me please?
Check on the No Answer AutoDial......way to big..Any suggestion?
---------- CALL STATUS STATS
+--------+----------------------+------------+
| STATUS | DESCRIPTION | CALLS |
+--------+----------------------+------------+
| A | Answering Machine | 2536 |
| AA | Answering Machine Au | 1 |
| B | Busy | 113 |
| CBHOLD | Call Back Hold | 369 |
| DC | Disconnected Number | 40 |
| DEC | Declined Sale | 1320 |
| DNC | DO NOT CALL | 133 |
| DROP | Agent Not Available | 70 |
| INCALL | Lead Being Called | 41 |
| N | No Answer | 130 |
| NA | No Answer AutoDial | 141628 |
| NI | Not Interested | 843 |
| NP | No Pitch No Price | 1 |
| QUEUE | Lead To Be Called | 8 |
| SALE | Sale Made | 1057 |
| XFER | Call Transferred | 1 |
+--------+----------------------+------------+
| TOTAL: | 148291 |
+-------------------------------+------------+
AndreO
 
Posts: 10
Joined: Mon Aug 04, 2008 10:44 am

Postby mflorell » Thu Sep 18, 2008 1:39 pm

What is your dial timeout set to now?

Are you using sip-silence Playback on 8365 in youe dialplan?
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Postby AndreO » Thu Sep 18, 2008 1:43 pm

time out 60 sec
AndreO
 
Posts: 10
Joined: Mon Aug 04, 2008 10:44 am

Re: No Answer AutoDial - how to

Postby mattyou1985 » Tue Apr 19, 2016 3:38 pm

WaitForSilence Options - If Wait For Silence is desired on calls that are detected as Answering Machines then this field has those options. There are two settings separated by a comma, the first option is how long to detect silence in milliseconds and the second option is for how many times to detect that before playing the message. Default is EMPTY for disabled. A standard value for this would be wait for 2 seconds of silence twice: 2000,2

found under campaign detail settings set it to 200,5 thats my setting and its working
mattyou1985
 
Posts: 111
Joined: Tue Apr 19, 2016 3:30 pm


Return to ViciDialNow - GoAutoDial

Who is online

Users browsing this forum: No registered users and 40 guests