Agent Voice not Leaving VICIbox Server for most of the calls

Support forum for the ViciBox ISO Server Install and ISO LiveCD Demo

Moderators: enjay, williamconley, Staydog, mflorell, MJCoate, mcargile, Kumba

Agent Voice not Leaving VICIbox Server for most of the calls

Postby medk » Wed Oct 10, 2018 5:54 am

Hello,

Since I installed VICIbox 8.1.1, there are plenty of calls where:
- In my server recordings, the customer is clearly heard, the agent is clearly heard.
- In the VOIP provider recordings, the customer is clearly heard, the agent is MUTED.
Most of the calls are like that.

We are working on a Manual Outbound Campaing, The codecs are the same allowed by the Voip provider (alaw and g729) with 20Mbps optics fiber connection.

I'm using:
disallow=all
allow=alaw
which is the same carrier configuration before I switched from GoAutodial 3.3
With GoAutodial 3.3 I never faced this problem.

Now I added:
disallow=all
allow=alaw
allow=g729
And still the same problem. It started with the switch to VICIbox.
VICIbox 8.1.1
OpenSuSE Leap v.42.3 64-bit
Kernel v.4.4.155
Asterisk v.13.21.1-vici
DAHDI v.2.11.1
LibPRI v.1.6.0
Amfletec VoiceSync v.1.3.8
OpenR2 v.1.3.3 for MFC/R2 support
ViciDial SVN v.2.14-689a build 180922-0958 revision 3035
medk
 
Posts: 26
Joined: Thu Sep 15, 2016 7:02 am

Re: Agent Voice not Leaving VICIbox Server for most of the c

Postby Kumba » Wed Oct 10, 2018 9:39 am

one-way audio is almost always a router or NAT issue.
Kumba
 
Posts: 939
Joined: Tue Oct 16, 2007 11:44 pm
Location: Florida

Re: Agent Voice not Leaving VICIbox Server for most of the c

Postby medk » Fri Oct 12, 2018 4:10 am

Kumba wrote:one-way audio is almost always a router or NAT issue.


It's not 100% of the calls, it's about half the calls.

I disabled call recording and the problem is gone forever. I don't understand why because with GoAutodial, call recording does other things like system delay, bad sound quality...
Here it didn't do all of that but it caused half the calls with one-way audio.
VICIbox 8.1.1
OpenSuSE Leap v.42.3 64-bit
Kernel v.4.4.155
Asterisk v.13.21.1-vici
DAHDI v.2.11.1
LibPRI v.1.6.0
Amfletec VoiceSync v.1.3.8
OpenR2 v.1.3.3 for MFC/R2 support
ViciDial SVN v.2.14-689a build 180922-0958 revision 3035
medk
 
Posts: 26
Joined: Thu Sep 15, 2016 7:02 am


Return to ViciBox Server Install and Demo

Who is online

Users browsing this forum: No registered users and 56 guests