Vicibox 8 (waiting for ringing)

Support forum for the ViciBox ISO Server Install and ISO LiveCD Demo

Moderators: enjay, williamconley, Staydog, mflorell, MJCoate, mcargile, Kumba

Vicibox 8 (waiting for ringing)

Postby securecyber1 » Fri Jun 25, 2021 5:53 am

Hi,

I'm new here. I recently set up vicidial installed through vicibox8.iso Everything is working fine. Screen -ls has 11 activities. and dahdi_cfg -vvvvvv is also working fine.

It's only giving waiting for ringing(and dialer never rings phone). Issue is having for both(ie Automated dialing and manual dialing). Finally, I get this message: "Dial timed out, contact your system administrator"


Asterisk: 1.4.21.2
BUILD: 210623-0930
VERSION: 2.14-640c
securecyber1
 
Posts: 8
Joined: Tue Oct 20, 2020 3:38 pm

Re: Vicibox 8 (waiting for ringing)

Postby carpenox » Fri Jun 25, 2021 6:32 am

did you setup a voip carrier on it? and i doubt you are using ast 1.4, thats just what the default installation says on server, you are probably on ast 11. you should download the manual and read so you can learn some things, and read the sticky notes at the top of each subtopic here on the forum. welcome to the family. you may also want to check out my blog in my signature
Alma Linux 9.3 | Version: 2.14-911a | SVN Version: 3815 | DB Schema Version: 1710 | Asterisk 18.18.1
www.dialer.one -:- 1-833-DIALER-1 -:- https://linktr.ee/CyburDial -:- WhatsApp: +19549477572 -:- Skype: live:carpenox_3
carpenox
 
Posts: 2230
Joined: Wed Apr 08, 2020 2:02 am
Location: Coral Springs, FL

Re: Vicibox 8 (waiting for ringing)

Postby securecyber1 » Fri Jun 25, 2021 6:45 am

Thanks for your reply. I have tried different method before posting it.

I have already setup Telnyx carrier. Everything is alright(Below is carrier detail)

[telnyx]
disallow=all
allow=ulaw
allow=g729
type=friend
host=sip.telnyx.com
username=My username here.
secret=my password here
host=dynamic
dtmfmode=rfc2833
context=default



exten => _9NXXXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9NXXXXXXXXXX,2,Dial(${Telnyx}/${EXTEN:1},60,tTor)
exten => _9NXXXXXXXXXX,3,Hangup

Yes, you're right default is asterisk version is 1.4(BUt I have changed it to: 13.21.1-vici)
From Admin -> Server.

Let me know If I made any mistake?
securecyber1
 
Posts: 8
Joined: Tue Oct 20, 2020 3:38 pm

Re: Vicibox 8 (waiting for ringing)

Postby GenXOutsourcing » Fri Jun 25, 2021 8:18 am

What does the asterisk CLI say when you try to place a call?

When you say that you changed it to asterisk version 13 in Admin > Servers............ do you have asterisk 13 installed, or do you have ast1.4 installed in the server?

Also, why wouldnt you use Vicibox9 if is a new install?
Built too many to count, Centos7 Scratch install, Opensuse Scratch install, Centos8 Scratch install, etc.
Dual 8 core/32gb RAM/500gb SSDs
SVN Version:3440
VERSION: 2.14-812a
genxoutsourcing.com
GenXOutsourcing
 
Posts: 120
Joined: Sun Sep 22, 2019 12:53 am

Re: Vicibox 8 (waiting for ringing)

Postby securecyber1 » Fri Jun 25, 2021 2:12 pm

I was having issues with vicibox 9. Zypper ref was not working properly.

That's why I used vicibox 8.

Yes. I changed asterisk version on vicidial after checking version from asterisk CLI.
securecyber1
 
Posts: 8
Joined: Tue Oct 20, 2020 3:38 pm

Re: Vicibox 8 (waiting for ringing)

Postby GenXOutsourcing » Fri Jun 25, 2021 2:29 pm

GenXOutsourcing wrote:What does the asterisk CLI say when you try to place a call?

When you say that you changed it to asterisk version 13 in Admin > Servers............ do you have asterisk 13 installed, or do you have ast1.4 installed in the server?

Also, why wouldnt you use Vicibox9 if is a new install?


What does the asterisk CLI say when you try to place a call?
Try to make a call and copy the output of the CLI here.


For Vicibox9, the zypper ref will give you errors if you try to update. If you install the ISO and DO NOT update, you will have a usable system. Also, there are several threads on how to handle the missing repos.

I would suggest that you install Vicibox9 ISO, do not zypper ref or zypper up. Then update the OS from Leap15.1 to Leap15.2, and you will have an updated complete functional system.
Built too many to count, Centos7 Scratch install, Opensuse Scratch install, Centos8 Scratch install, etc.
Dual 8 core/32gb RAM/500gb SSDs
SVN Version:3440
VERSION: 2.14-812a
genxoutsourcing.com
GenXOutsourcing
 
Posts: 120
Joined: Sun Sep 22, 2019 12:53 am

Re: Vicibox 8 (waiting for ringing)

Postby carpenox » Fri Jun 25, 2021 6:19 pm

you can find the instructions on how to update on my blog in my signature
Alma Linux 9.3 | Version: 2.14-911a | SVN Version: 3815 | DB Schema Version: 1710 | Asterisk 18.18.1
www.dialer.one -:- 1-833-DIALER-1 -:- https://linktr.ee/CyburDial -:- WhatsApp: +19549477572 -:- Skype: live:carpenox_3
carpenox
 
Posts: 2230
Joined: Wed Apr 08, 2020 2:02 am
Location: Coral Springs, FL

Re: Vicibox 8 (waiting for ringing)

Postby securecyber1 » Sat Jun 26, 2021 12:06 pm

I have now Installed vicibox 9. Still the issue is same.

Asterisk -r
results:

NOTICE[2166]: chan_sip.c:28751 handle_request_register: Registration from '"505" <sip:505@xxx.xx.xx.xxx>' failed for 'xxx.xx.xxxx.xxx:5350' - Wrong password

NOTICE[2166]: chan_sip.c:28751 handle_request_register: Registration from '<sip:1000@xxx.xx.xx.xxx>' failed for 'xx.xxx.xx.xxx:61612' - Wrong password
securecyber1
 
Posts: 8
Joined: Tue Oct 20, 2020 3:38 pm

Re: Vicibox 8 (waiting for ringing)

Postby carpenox » Sat Jun 26, 2021 1:03 pm

are those actually you trying to register or is it SIP attacks?
Alma Linux 9.3 | Version: 2.14-911a | SVN Version: 3815 | DB Schema Version: 1710 | Asterisk 18.18.1
www.dialer.one -:- 1-833-DIALER-1 -:- https://linktr.ee/CyburDial -:- WhatsApp: +19549477572 -:- Skype: live:carpenox_3
carpenox
 
Posts: 2230
Joined: Wed Apr 08, 2020 2:02 am
Location: Coral Springs, FL

Re: Vicibox 8 (waiting for ringing)

Postby securecyber1 » Sat Jun 26, 2021 4:27 pm

I don't think it's SIP attack.

Asterisk isn't registering for SIP. That's why dialer is getting failed to make calls.
securecyber1
 
Posts: 8
Joined: Tue Oct 20, 2020 3:38 pm

Re: Vicibox 8 (waiting for ringing)

Postby carpenox » Sat Jun 26, 2021 6:15 pm

your trying both those phones? 505 and 1000?
Alma Linux 9.3 | Version: 2.14-911a | SVN Version: 3815 | DB Schema Version: 1710 | Asterisk 18.18.1
www.dialer.one -:- 1-833-DIALER-1 -:- https://linktr.ee/CyburDial -:- WhatsApp: +19549477572 -:- Skype: live:carpenox_3
carpenox
 
Posts: 2230
Joined: Wed Apr 08, 2020 2:02 am
Location: Coral Springs, FL

Re: Vicibox 8 (waiting for ringing)

Postby securecyber1 » Sun Jun 27, 2021 10:31 am

No. I'm using phone number 202.

Telnyx and another voip i used both aren't working.
securecyber1
 
Posts: 8
Joined: Tue Oct 20, 2020 3:38 pm

Re: Vicibox 8 (waiting for ringing)

Postby carpenox » Sun Jun 27, 2021 10:45 am

yea well those are sip attacks then, you need to secure your server with my article on my blog: http://vicidial.blog
Alma Linux 9.3 | Version: 2.14-911a | SVN Version: 3815 | DB Schema Version: 1710 | Asterisk 18.18.1
www.dialer.one -:- 1-833-DIALER-1 -:- https://linktr.ee/CyburDial -:- WhatsApp: +19549477572 -:- Skype: live:carpenox_3
carpenox
 
Posts: 2230
Joined: Wed Apr 08, 2020 2:02 am
Location: Coral Springs, FL

Re: Vicibox 9 (waiting for ringing)

Postby securecyber1 » Sun Jun 27, 2021 12:59 pm

Why calls are not getting connect? It shows: "waiting for Ringing "

Happening on automated and manual dialing.
securecyber1
 
Posts: 8
Joined: Tue Oct 20, 2020 3:38 pm

Re: Vicibox 8 (waiting for ringing)

Postby carpenox » Sun Jun 27, 2021 1:36 pm

did you pay for channels with telnyx? they are not free, they are like $12 bucks per channel with them, your carrier is probably not setup correctly
Alma Linux 9.3 | Version: 2.14-911a | SVN Version: 3815 | DB Schema Version: 1710 | Asterisk 18.18.1
www.dialer.one -:- 1-833-DIALER-1 -:- https://linktr.ee/CyburDial -:- WhatsApp: +19549477572 -:- Skype: live:carpenox_3
carpenox
 
Posts: 2230
Joined: Wed Apr 08, 2020 2:02 am
Location: Coral Springs, FL

Re: Vicibox 8 (waiting for ringing)

Postby securecyber1 » Mon Jun 28, 2021 11:44 am

ping google.com is also not working. I think asterisk is not reaching out to the carrier server.

But other carrier doesn't need anything extra. It's also not working.
securecyber1
 
Posts: 8
Joined: Tue Oct 20, 2020 3:38 pm

Re: Vicibox 8 (waiting for ringing)

Postby carpenox » Mon Jun 28, 2021 11:54 am

message me on skype, ill help you get it setup correctly. live:carpenox_3
Alma Linux 9.3 | Version: 2.14-911a | SVN Version: 3815 | DB Schema Version: 1710 | Asterisk 18.18.1
www.dialer.one -:- 1-833-DIALER-1 -:- https://linktr.ee/CyburDial -:- WhatsApp: +19549477572 -:- Skype: live:carpenox_3
carpenox
 
Posts: 2230
Joined: Wed Apr 08, 2020 2:02 am
Location: Coral Springs, FL


Return to ViciBox Server Install and Demo

Who is online

Users browsing this forum: No registered users and 58 guests