Moderators: enjay, williamconley, Staydog, mflorell, MJCoate, mcargile, Kumba
Kumba wrote:MySQL data directory was move to /srv/mysql/data in order to prepare the server for having separate SSD drives. The binary log and regular logging are in their normal spot, but the actual database resides under /srv/mysql/data. You would mount your SSD partition as /srv/mysql to get the proper effect. This was done to support more boutique SSD drives like NVMe which don't always boot correctly. Also allows you to use a relatively inexpensive drive for the OS and spend money on a high-quality SSD that doesn't need to be so big.
Regarding scp, are you saying a particular key algorithm you use for SSH is not loaded by default? Looks like it's more of a legacy SSH issue. I'll put it into the bugfix notes and add it to 8.0.2 when I roll that out. Not sure how old of a Linux install you would need for that to be an issue but it'll be in there. If you can send me what you had to change I'll put that in he bugfix. Otherwise I have nothing that generates this error so I can't really give any instructions to people.
I'll look into the permision issue and add it to the bugfix thread once I verify it.
frequency wrote:KexAlgorithms diffie-hellman-group1-sha1
We added this in sshd_config. When we tried to scp the DB from a centOS server onto vicibox8, we added this in this config.
Tried using the manual we received from Vicidial support and still unable to use the webphone successfully . Phone is still "connecting". no firewall on server, hardware firewall disabled.
Certicates are in pem format and in /etc/letsencrypr/live/fqdn/ folder. Does the location or format type make a difference?Kumba wrote:MySQL data directory was move to /srv/mysql/data in order to prepare the server for having separate SSD drives. The binary log and regular logging are in their normal spot, but the actual database resides under /srv/mysql/data. You would mount your SSD partition as /srv/mysql to get the proper effect. This was done to support more boutique SSD drives like NVMe which don't always boot correctly. Also allows you to use a relatively inexpensive drive for the OS and spend money on a high-quality SSD that doesn't need to be so big.
Regarding scp, are you saying a particular key algorithm you use for SSH is not loaded by default? Looks like it's more of a legacy SSH issue. I'll put it into the bugfix notes and add it to 8.0.2 when I roll that out. Not sure how old of a Linux install you would need for that to be an issue but it'll be in there. If you can send me what you had to change I'll put that in he bugfix. Otherwise I have nothing that generates this error so I can't really give any instructions to people.
I'll look into the permision issue and add it to the bugfix thread once I verify it.
frequency wrote:ntp daemon is not added by default..causing time sync issues and asterisk crash at times (not sure about asterisk though).
Kumba wrote:I just downloaded and installed ViciBox v.8.0.1 from the website. NTP is running by default, so I am not sure what happened for it to not be running on your system.frequency wrote:ntp daemon is not added by default..causing time sync issues and asterisk crash at times (not sure about asterisk though).
[Oct 11 16:44:33] WARNING[9665]: chan_sip.c:4039 retrans_pkt: Retransmission timeout reached on transmission 376184150-223829631-2133773997 for seqno 2 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions
Packet timed out after 31999ms with no response
[Oct 11 16:44:41] WARNING[9665]: chan_sip.c:4039 retrans_pkt: Retransmission timeout reached on transmission 1234756390-152418122-840864098 for seqno 2 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions
frequency wrote:i think i will have to check this by reinstalling because my asterisk is crashing with 20 inbound calls with 30 agents with load average going as high as 11.00 when it crashes. very strange. never witnessed that before on any vici7 and yes we are using the new webrtc phone as well.
frequency wrote:Kumba wrote:I just downloaded and installed ViciBox v.8.0.1 from the website. NTP is running by default, so I am not sure what happened for it to not be running on your system.frequency wrote:ntp daemon is not added by default..causing time sync issues and asterisk crash at times (not sure about asterisk though).
i think i will have to check this by reinstalling because my asterisk is crashing with 20 inbound calls with 30 agents with load average going as high as 11.00 when it crashes. very strange. never witnessed that before on any vici7 and yes we are using the new webrtc phone as well.
- Code: Select all
[Oct 11 16:44:33] WARNING[9665]: chan_sip.c:4039 retrans_pkt: Retransmission timeout reached on transmission 376184150-223829631-2133773997 for seqno 2 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions
Packet timed out after 31999ms with no response
[Oct 11 16:44:41] WARNING[9665]: chan_sip.c:4039 retrans_pkt: Retransmission timeout reached on transmission 1234756390-152418122-840864098 for seqno 2 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions
chornyi_taras wrote:this is known asterisk 11 issue https://issues.asterisk.org/jira/plugin ... RISK-25275. I have a good news for you. Patch that fixes this issue is already included in vicibox repos. viewtopic.php?f=8&t=37706&p=130263#p130263
williamconley wrote:frequency wrote:i think i will have to check this by reinstalling because my asterisk is crashing with 20 inbound calls with 30 agents with load average going as high as 11.00 when it crashes. very strange. never witnessed that before on any vici7 and yes we are using the new webrtc phone as well.
Pay attention to the Inbound agi scripts, they are complex and can be challenging and may be reacting differently for some reason on the new platform. If they have a memory leak, that can be detrimental even after the call has been routed and the agi should have dropped.
frequency wrote:chornyi_taras wrote:this is known asterisk 11 issue https://issues.asterisk.org/jira/plugin ... RISK-25275. I have a good news for you. Patch that fixes this issue is already included in vicibox repos. viewtopic.php?f=8&t=37706&p=130263#p130263
Thank you and yes, using the new WebRTC phone and also tried your PBXWebPhone. Both replicating the same issue.williamconley wrote:frequency wrote:i think i will have to check this by reinstalling because my asterisk is crashing with 20 inbound calls with 30 agents with load average going as high as 11.00 when it crashes. very strange. never witnessed that before on any vici7 and yes we are using the new webrtc phone as well.
Pay attention to the Inbound agi scripts, they are complex and can be challenging and may be reacting differently for some reason on the new platform. If they have a memory leak, that can be detrimental even after the call has been routed and the agi should have dropped.
Dialplans and agi's seems to be working with 2 other closer servers.
frequency wrote:chornyi_taras wrote:Dialplans and agi's seems to be working with 2 other closer servers.
Configuring Telephony Server...
/usr/bin/sox FAIL formats: can't open input file `./*.gsm': No such file or directory
Loading GMT and Phone Codes...
Dialer:~ # service ntpd status
● ntpd.service - NTP Server Daemon
Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled; vendor preset: disabled)
Drop-In: /run/systemd/generator/ntpd.service.d
└─50-insserv.conf-$time.conf
Active: active (running) since Wed 2017-10-18 11:30:32 EDT; 5min ago
Docs: man:ntpd(1)
Main PID: 1691 (ntpd)
Tasks: 2 (limit: 512)
CGroup: /system.slice/ntpd.service
├─1691 /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -g -u ntp:ntp -c /etc/ntp.conf
└─1716 ntpd: asynchronous dns resolver
Oct 18 11:30:31 vicibox8 systemd[1]: Starting NTP Server Daemon...
Oct 18 11:30:32 vicibox8 ntpd[1673]: ntpd 4.2.8p10@1.3728-o Fri Jul 7 17:41:17 UTC 2017 (1): Starting
Oct 18 11:30:32 vicibox8 ntpd[1673]: Command line: /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -g -u ntp:ntp -c /etc/ntp.conf
Oct 18 11:30:32 vicibox8 ntpd[1691]: proto: precision = 1.160 usec (-20)
Oct 18 11:30:32 vicibox8 ntpd[1691]: switching logging to file /var/log/ntp
Oct 18 11:30:32 vicibox8 systemd[1]: Started NTP Server Daemon.
Oct 18 11:30:32 vicibox8 start-ntpd[1632]: Starting network time protocol daemon (NTPD)
uselessinfoguru wrote: when setting date and time, it will not allow me to select ntp, the accept button does not work with ntp selected
uselessinfoguru wrote:during os-install when i go to other settings, manual is selected by default
service ntpd status
ntpq -p
uselessinfoguru wrote:well, fresh install, same thing, ntp didn't sync until i ran yast timezone, and it auto-installed yast2-ntp-client
on the plus side the restore from a backup up vicibox 7.0.3 worked wonderfully on the 2nd install attempt (still not sure what happened the first time), everything seems good to go here now..
for others, if you can't get an ntp sync during os-install, use manual time, then after os-install run yast timezone, and set it to ntp there, it will then install the additional repositories required
DBI connect('asterisk:localhost:3306','cron',...) failed: Access denied for user 'cron'@'localhost' (using password: YES) at ./install.pl line 2689.
Couldn't connect to database: Access denied for user 'cron'@'localhost' (using password: YES) at ./install.pl line 2689.
Return to ViciBox Server Install and Demo
Users browsing this forum: No registered users and 33 guests