How to avoid "Scam Likely" and "Spam Risk" Caller IDs

Any and all non-support discussions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

How to avoid "Scam Likely" and "Spam Risk" Caller IDs

Postby chrisclasman » Thu Sep 12, 2019 7:47 pm

Hi all,

We've been experiencing very low connection rates lately, so we did a test to dial phone numbers we own. The results were "Scam Likely" and "Spam Risk" showing as the caller ID.
How can we avoid this?
We are definitely not running a scam, so it's unfortunate it shows up like this.

Are there any "best practices" in this regard?

Thank you!

Chris
chrisclasman
 
Posts: 9
Joined: Thu Apr 05, 2018 12:11 am

Re: How to avoid "Scam Likely" and "Spam Risk" Caller IDs

Postby williamconley » Fri Sep 13, 2019 12:16 pm

1) Welcome to the Party! 8-)

2) As you are obviously new here, I have some suggestions to help us all help you:

When you post, please post your entire configuration including (but not limited to) your installation method (7.X.X?) and vicidial version with build (VERSION: 2.X-XXXx ... BUILD: #####-####).

This IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)

You should also post: Asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box. If your installation method is "manual/from scratch" you must post your operating system with version (and the .iso version from which you installed your original operating system) plus a link to the installation instructions you used. If your installation is "Hosted" list the site name of the host.

If this is a "Cloud" or "Virtual" server, please note the technology involved along with the version of that techology (ie: VMware Server Version 2.0.2). If it is not, merely stating the Motherboard model # and CPU would be helpful.

Similar to This:

Vicibox X.X from .iso | Vicidial X.X.X-XXX Build XXXXXX-XXXX | Asterisk X.X.X | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel DG35EC | Core2Quad Q6600

3) Use your own actual phone number. Be sure your telco/VOIP company have properly registered the Caller ID Name. If you are dialing in Canada, you may also need to use the loopback dialing method for the caller id name field.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: How to avoid "Scam Likely" and "Spam Risk" Caller IDs

Postby ambiorixg12 » Tue Sep 17, 2019 1:11 pm

You has been impacted by SHAKEN / STIR caller ID authentication system. Make sure you re using a legitimate Caller ID that you own, because if you re doing CID spoofing is why Scam message is part of the CID.

Find more information here https://www.theverge.com/2019/6/6/18655 ... c-ajit-pai
ambiorixg12
 
Posts: 448
Joined: Tue Sep 17, 2013 10:35 pm

Re: How to avoid "Scam Likely" and "Spam Risk" Caller IDs

Postby vkad » Wed Oct 30, 2019 7:28 pm

ambiorixg12 wrote:You has been impacted by SHAKEN / STIR caller ID authentication system. Make sure you re using a legitimate Caller ID that you own, because if you re doing CID spoofing is why Scam message is part of the CID.

Find more information here https://www.theverge.com/2019/6/6/18655 ... c-ajit-pai


We buy dids from another carrier. How do we ensure that we are able to not be impacted by shaken/stir
Vicibox 8.0.1 (Asterisk 13.21.0-vici) + Remote WebRTC Agents
Version: 2.14b0.5 | SVN: 2990 | DB Version: 1548
1 x DB + Web + Dialer - E3 1270 v6 + 16gb ddr4 + 256gb SSD
2 x Additional Dialer - E3 1270 v6 + 8gb ddr4 + 256gb SSD
vkad
 
Posts: 208
Joined: Thu Nov 09, 2017 3:46 am

Re: How to avoid "Scam Likely" and "Spam Risk" Caller IDs

Postby ed123 » Tue Nov 26, 2019 11:48 pm

Hi, for me, I usually search on the internet by using the DID before I purchase it.. with country code or without. Mostly it helps for me.
ed123
 
Posts: 294
Joined: Mon Mar 15, 2010 9:19 pm


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 60 guests