sip Trunk with Patton FXO VOIP Gateway

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

sip Trunk with Patton FXO VOIP Gateway

Postby ahmedsallam » Sat Aug 21, 2021 10:01 pm

Good Morning Colleagues
I hope you are doing good and safe.

I need to configure SIP trunk between Vicidial and Patton FXO gateway . I have already configure it successfully with 3CX & FreePBX.

So is there any guide for trunking Vicidial with Patton FXO gateway?

Best Regards
ahmedsallam
 
Posts: 12
Joined: Thu Dec 07, 2017 9:12 am

Re: sip Trunk with Patton FXO VOIP Gateway

Postby ambiorixg12 » Mon Aug 23, 2021 7:45 pm

Usually this gateway works in trunk mode or registration mode, if is registration mode the gateway will register to Asterisk as SIP device, and then you send calls through that SIP device, in the case of trunk mode you just create a SIP peer and send calls to that peer
ambiorixg12
 
Posts: 448
Joined: Tue Sep 17, 2013 10:35 pm

Re: sip Trunk with Patton FXO VOIP Gateway

Postby ahmedsallam » Mon Aug 23, 2021 9:52 pm

Good ambiorixg12
Thx for your replay . Do you have any guide/example for configuring Patton or any Analog VOIP gateway with ViciDial in registration mode ?

Best Regards
ahmedsallam
 
Posts: 12
Joined: Thu Dec 07, 2017 9:12 am

Re: sip Trunk with Patton FXO VOIP Gateway

Postby ambiorixg12 » Tue Aug 24, 2021 8:47 am

I dont , I havent use those devices but based on what I have seems on Grandstream, OPenvox and Goip most of the FXO and GSM gateway follow this configuration mode
ambiorixg12
 
Posts: 448
Joined: Tue Sep 17, 2013 10:35 pm

Re: sip Trunk with Patton FXO VOIP Gateway

Postby ahmedsallam » Tue Aug 24, 2021 9:58 pm

Thx for your feedback
ahmedsallam
 
Posts: 12
Joined: Thu Dec 07, 2017 9:12 am


Return to Support

Who is online

Users browsing this forum: No registered users and 85 guests