ViciBox v.9.0.2 build with Linux MD RAID1 - May 9th 2020
Posted: Wed Oct 02, 2019 1:43 am
Here is a link to a ViciBox V9 build which installs the root file system to a degraded linux MD RAID 1. The idea being that after you install the ISO, you would then login and add a second drive to it to get the redundancy. You could also manually reconfigure the RAID array at this point into anything else you wanted too, like a RAID10.
ISO: http://download.vicidial.com/iso/vicibo ... 0.2-md.iso
MD5: http://download.vicidial.com/iso/vicibo ... 0.2-md.md5
Once you get the ISO installed, you can run 'vicibox-mdraid1' and it should setup the rest of the RAID array for you. By default it assumes /dev/sda is the drive you installed the ISO to and /dev/sdb is the drive you want to setup the RAID array on. Ideally you will want to wipe the drives clean so there's no stale left-over data on the drives like previous Linux installs or RAID configs, but it should be able to handle that.
Enjoy!
ISO: http://download.vicidial.com/iso/vicibo ... 0.2-md.iso
MD5: http://download.vicidial.com/iso/vicibo ... 0.2-md.md5
Once you get the ISO installed, you can run 'vicibox-mdraid1' and it should setup the rest of the RAID array for you. By default it assumes /dev/sda is the drive you installed the ISO to and /dev/sdb is the drive you want to setup the RAID array on. Ideally you will want to wipe the drives clean so there's no stale left-over data on the drives like previous Linux installs or RAID configs, but it should be able to handle that.
Enjoy!