Any and all non-support discussions
Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N
by mflorell » Fri Sep 08, 2006 4:45 pm
I have confirmed today a bug in Asterisk 1.2.11 involving meetme and SIP or IAX trunks. What happens is in auto-dial mode or on inbound calls, it sounds like a call has been sent to an agent, but there is no audio.
If you are using SIP or IAX trunks please use Asterisk 1.2.10 instead.
Here's a link to the bug on Digium bugs:
http://bugs.digium.com/view.php?id=7909
Please monitor this bug so that we can get more attention on this.
Last edited by
mflorell on Fri Sep 08, 2006 11:34 pm, edited 1 time in total.
-
mflorell
- Site Admin
-
- Posts: 18379
- Joined: Wed Jun 07, 2006 2:45 pm
- Location: Florida
-
by smt8d1 » Fri Sep 08, 2006 6:33 pm
I was banging my head against a wall trying to figure out what I was doing wrong. =)
-
smt8d1
-
- Posts: 11
- Joined: Mon Jul 03, 2006 6:26 pm
by espencer » Fri Sep 08, 2006 10:12 pm
holy moly -- my symptoms exactly!!
nice find!
-
espencer
-
- Posts: 33
- Joined: Wed Aug 23, 2006 3:16 pm
by espencer » Sat Sep 09, 2006 12:50 pm
asterisk 1.2.12 released just now:
http://www.asterisk.org/asterisk-1.2.12
does any of this sound like it fixes the problem we are experiencing:
Asterisk 1.2.12 includes a number of bug fixes, including fixes for two regressions that occurred in the 1.2.11 release. Specifically, the AGI 'GET VARIABLE' command has now gone back to its previous behavior, and CDR records now reflect the CallerID number instead of ANI in the situations that this was the case in earlier 1.2 releases.
-
espencer
-
- Posts: 33
- Joined: Wed Aug 23, 2006 3:16 pm
by mflorell » Sat Sep 09, 2006 3:06 pm
I will test it on Monday, but I don't think that's it, I believe the problem is in the removal of a few routines that did transcoding in the channel.c code.
-
mflorell
- Site Admin
-
- Posts: 18379
- Joined: Wed Jun 07, 2006 2:45 pm
- Location: Florida
-
by gerski » Sat Sep 09, 2006 11:40 pm
Hello mflorell,
That is my problem on one of my server running channel bank sending iax channels. the CLI output said the call has been sent but nothing happen on agents..
im using app_conference now but the load average of my server is around 6.0 to 10.0
Hope we can fix this
-
gerski
-
- Posts: 432
- Joined: Fri Jul 14, 2006 6:21 am
-
by mflorell » Sun Sep 10, 2006 12:48 am
This bug has nothing to do with load. And with a load of 6.0 to 10.0 you will have many problems. You need to distribute the load across more computers.
-
mflorell
- Site Admin
-
- Posts: 18379
- Joined: Wed Jun 07, 2006 2:45 pm
- Location: Florida
-
by gerski » Sun Sep 10, 2006 1:15 am
what i mean is that meetme conference does not work wit me because of no audio is sending to the zap.
right now im using app_conference and i think it loads more processor than meetme, am i right?
-
gerski
-
- Posts: 432
- Joined: Fri Jul 14, 2006 6:21 am
-
by mflorell » Sun Sep 10, 2006 1:37 am
app_conference almost always uses less CPU than meetme. But it is not as stable.
-
mflorell
- Site Admin
-
- Posts: 18379
- Joined: Wed Jun 07, 2006 2:45 pm
- Location: Florida
-
by gerski » Sun Sep 10, 2006 1:38 am
ok will review my installation again.. do you have any suggestion as of now to use meetme? do u suggest to install lower version of asterisk?
-
gerski
-
- Posts: 432
- Joined: Fri Jul 14, 2006 6:21 am
-
by mflorell » Sun Sep 10, 2006 2:59 am
Yes, use Asterisk 1.2.10
-
mflorell
- Site Admin
-
- Posts: 18379
- Joined: Wed Jun 07, 2006 2:45 pm
- Location: Florida
-
by mflorell » Mon Sep 11, 2006 11:53 am
Bug is fixed in Asterisk SVN asterisk 1.2
I have also posted a patch for Asterisk 1.2.12:
(asterisk 1.2.12) - channel.c bug fix -
**THERE IS NO FIX FOR ASTERISK 1.2.11 DO NOT USE IT**
wget
http://www.eflo.net/files/channel.c-42600.patch
patch -p1 < ./channel.c-42600.patch
- File to patch: channel.c
-
mflorell
- Site Admin
-
- Posts: 18379
- Joined: Wed Jun 07, 2006 2:45 pm
- Location: Florida
-
by Op3r » Mon Sep 11, 2006 12:11 pm
Thats the reason why we still use 1.2.10
we are always being carefull when we install asterisk thats why we dont install the latest version
Get paid for US outbound Toll Free calls. PM me.
-
Op3r
-
- Posts: 1432
- Joined: Wed Jun 07, 2006 7:53 pm
- Location: Manila
-
by gerski » Mon Sep 11, 2006 10:01 pm
we are now using Asterisk SVN asterisk 1.2 and it works perfectly
-
gerski
-
- Posts: 432
- Joined: Fri Jul 14, 2006 6:21 am
-
Return to General Discussion
Who is online
Users browsing this forum: No registered users and 51 guests